Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 92mm square CPU fan with 4-pin connector

OEM Industries

OEM Industries DS09225B12U P100 92x25mm 4-pin CPU cooler

SKU CH-2DW4-CHHBV

A 92mm square fan with ball bearing and 4-pin PWM control for CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size92mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 92 mm frame fits standard CPU mounts
  • 25 mm thickness clears low-profile cases
  • ball bearing extends operating life
  • 4-pin PWM connector enables automatic speed control
  • 12 V 0.56 A draws minimal power

Compact 92 mm CPU cooler for low-profile builds

This 92 x 25 mm square cooler fits tight chassis where larger towers cannot. The four-pin PWM connector lets the motherboard regulate speed automatically. Ball-bearing construction supports continuous operation in always-on systems. It is aimed at builders assembling small-form-factor or replacement units.

Four-pin PWM control defines the practical speed

The motherboard can vary voltage between minimum and maximum duty cycles, but the fan itself is rated at 12 V and 0.56 A. No RGB or addressable lighting is present, so the header carries only power and tachometer signals. Acoustic and thermal ceilings are set by this single-fan design.

Replaces stock 92 mm coolers when noise

The jump is worthwhile if the original cooler uses sleeve bearings that have worn or if the chassis cannot accommodate a taller heatsink. It does not suit builds requiring dual-fan airflow, liquid-cooling mounts or higher static pressure than a single 92 mm unit can deliver.

Privalumai

  • 92 mm frame fits standard CPU mounts
  • 25 mm thickness clears low-profile cases
  • ball bearing extends operating life
  • 4-pin PWM connector enables automatic speed control
  • 12 V 0.56 A draws minimal power

Specifikacijos

ModelDS09225B12U
ColorBlack
TypeFan only
Fan Size92mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

Klausimai apie šią prekę

Which 92 mm variant should I pick for a standard CPU header?

The DS09225B12U P100 is the only 92x25 mm version listed, with a 12 V 0.56 A 4-pin PWM connector that fits standard CPU fan headers.

What does the 12 V 0.56 A rating mean once the fan is running in my system?

It draws up to 0.56 A on the 12 V rail, so the motherboard header must supply at least that current for full speed control.

How does the 4-pin PWM interface cap the fan's speed range in practice?

The 4-wire PWM connection lets the motherboard vary duty cycle from 0 to 100 %, giving full speed control down to near-zero RPM.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.