Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 90mm square fan with 25mm depth and three-pin connector

OEM Industries

OEM Industries KDE1209PTV3 90mm 25mm 12V 1.2W 3 Pin CPU cooler

SKU CH-HT62-Z3SV6

90 mm maglev fan delivers 12 V, 1.2 W cooling with a three-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size90mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • 90 mm fan fits compact CPU coolers
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.2 W draw keeps power use low
  • Three-pin connector enables speed monitoring
  • 25 mm thick frame suits standard mounting points

90 mm Maglev Fan for CPU Cooling

This 90 mm fan uses a maglev bearing and runs on 12 V at 1.2 W. It is built for compact CPU air coolers that need a thin 25 mm profile. The three-pin connector provides simple speed reporting without PWM control. Buyers who need a 120 mm frame or a four-pin PWM header should look elsewhere.

Airflow Capacity and Limits

The 90 mm diameter and 25 mm thickness set the airflow ceiling for small tower or low-profile heatsinks. It can move enough air for modest thermal loads in tight chassis. It runs out of headroom when paired with high-TDP processors or dense fin stacks that demand higher static pressure.

Thermals Noise and Power Draw

At 1.2 W the motor adds minimal heat to the loop and keeps system power draw low. Maglev bearing operation reduces mechanical noise compared with sleeve or ball alternatives. The fixed three-pin voltage curve means acoustic output rises linearly with voltage rather than dropping at idle.

Privalumai

  • 90 mm fan fits compact CPU coolers
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.2 W draw keeps power use low
  • Three-pin connector enables speed monitoring
  • 25 mm thick frame suits standard mounting points

Specifikacijos

ModelKDE1209PTV3
ColorBlack
TypeFan only
Fan Size90mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

Klausimai apie šią prekę

Will the 90 mm Maglev fan with 3-pin connector run on an older motherboard header that only supplies 12 V?

Yes, the fan is rated for 12 V and draws 1.2 W, so a standard 3-pin header providing 12 V will power it correctly.

How can I confirm the KDE1209PTV3 is spinning at the expected speed after installation?

Monitor the RPM reading in BIOS or fan-control software; a steady value that changes with PWM or voltage adjustments shows the Maglev bearing is operating normally.

Does the package include mounting hardware for a CPU socket, or only the 90 mm fan itself?

The product is listed as fan only, so only the 90 mm Maglev fan with 3-pin connector is supplied; any CPU mounting brackets or retention clips must be sourced separately.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.