Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Black 90mm square fan with 25mm depth and three-pin connector

OEM Industries

OEM Industries KDE1209PTV3 90mm 25mm 12V 1.2W 3 Pin CPU cooler

SKU CH-HT62-Z3SV6

90 mm maglev fan delivers 12 V, 1.2 W cooling with a three-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size90mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • 90 mm fan fits compact CPU coolers
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.2 W draw keeps power use low
  • Three-pin connector enables speed monitoring
  • 25 mm thick frame suits standard mounting points

90 mm Maglev Fan for CPU Cooling

This 90 mm fan uses a maglev bearing and runs on 12 V at 1.2 W. It is built for compact CPU air coolers that need a thin 25 mm profile. The three-pin connector provides simple speed reporting without PWM control. Buyers who need a 120 mm frame or a four-pin PWM header should look elsewhere.

Airflow Capacity and Limits

The 90 mm diameter and 25 mm thickness set the airflow ceiling for small tower or low-profile heatsinks. It can move enough air for modest thermal loads in tight chassis. It runs out of headroom when paired with high-TDP processors or dense fin stacks that demand higher static pressure.

Thermals Noise and Power Draw

At 1.2 W the motor adds minimal heat to the loop and keeps system power draw low. Maglev bearing operation reduces mechanical noise compared with sleeve or ball alternatives. The fixed three-pin voltage curve means acoustic output rises linearly with voltage rather than dropping at idle.

Istaknuto

  • 90 mm fan fits compact CPU coolers
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.2 W draw keeps power use low
  • Three-pin connector enables speed monitoring
  • 25 mm thick frame suits standard mounting points

Specifikacije

ModelKDE1209PTV3
ColorBlack
TypeFan only
Fan Size90mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

Pitanja o ovom artiklu

Will the 90 mm Maglev fan with 3-pin connector run on an older motherboard header that only supplies 12 V?

Yes, the fan is rated for 12 V and draws 1.2 W, so a standard 3-pin header providing 12 V will power it correctly.

How can I confirm the KDE1209PTV3 is spinning at the expected speed after installation?

Monitor the RPM reading in BIOS or fan-control software; a steady value that changes with PWM or voltage adjustments shows the Maglev bearing is operating normally.

Does the package include mounting hardware for a CPU socket, or only the 90 mm fan itself?

The product is listed as fan only, so only the 90 mm Maglev fan with 3-pin connector is supplied; any CPU mounting brackets or retention clips must be sourced separately.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.