Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 60mm square fan with 3-pin connector

OEM Industries

OEM Industries TUDC12N7S-306 60mm 3-pin CPU cooler

SKU CH-2VNE-XBNNC

A 60 mm ball-bearing case fan with a 3-pin connector runs at 12 V drawing 0.35 A for 4.2 W

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Ball bearing reduces wear for longer service life
  • 12 V 0.35 A 4.2 W draws little power from the system
  • 60 mm 6025 frame fits tight server chassis
  • Three-pin connector enables motherboard speed monitoring
  • Black finish matches dark builds without LED light

60 mm Server CPU Cooler

The OEM Industries TUDC12N7S-306 is a compact square fan designed for server and workstation enclosures. It suits administrators maintaining 1U racks or small-form-factor builds where vertical clearance is limited. The unit ships new and ready for direct replacement of failed 60 mm coolers.

Capacity and Headroom

The fan draws 0.35 A at 12 V for a rated 4.2 W power draw, moving air through a 60 by 25 mm frame. Ball-bearing construction sustains continuous operation in high-temperature chassis, though the single 3-pin connector provides no PWM speed control. It covers basic thermal loads but lacks headroom for overclocked or multi-core server CPUs under sustained load.

Build Integration

A standard three-pin header on the motherboard or fan controller supplies power and tachometer feedback. The 60 mm footprint fits tight brackets without blocking adjacent memory slots or PCIe cards. No LED lighting keeps the profile neutral for datacentre aesthetics, while the black finish blends with most server chassis interiors.

Privalumai

  • Ball bearing reduces wear for longer service life
  • 12 V 0.35 A 4.2 W draws little power from the system
  • 60 mm 6025 frame fits tight server chassis
  • Three-pin connector enables motherboard speed monitoring
  • Black finish matches dark builds without LED light

Specifikacijos

ModelTUDC12N7S-306
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Klausimai apie šią prekę

Will the 60 mm TUDC12N7S-306 fit the same 6025 mounting holes on my older server board?

The fan uses the standard 60 × 25 mm square frame, so it aligns with legacy 6025 mounting patterns found on many older server boards.

How can I confirm the 3-pin TUDC12N7S-306 is spinning at the correct speed after installation?

Connect the 3-pin header to the motherboard and monitor the RPM reading in BIOS or a hardware-monitoring utility; a steady value indicates normal operation.

Does the TUDC12N7S-306 package include mounting screws or a heatsink, or must I buy them separately?

The unit is supplied as a fan only — no screws, brackets or heatsink are included, so you will need to source mounting hardware separately.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.