Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 60mm square fan with 3-pin connector

OEM Industries

OEM Industries TUDC12N7S-306 60mm 3-pin CPU cooler

SKU CH-2VNE-XBNNC

A 60 mm ball-bearing case fan with a 3-pin connector runs at 12 V drawing 0.35 A for 4.2 W

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Ball bearing reduces wear for longer service life
  • 12 V 0.35 A 4.2 W draws little power from the system
  • 60 mm 6025 frame fits tight server chassis
  • Three-pin connector enables motherboard speed monitoring
  • Black finish matches dark builds without LED light

60 mm Server CPU Cooler

The OEM Industries TUDC12N7S-306 is a compact square fan designed for server and workstation enclosures. It suits administrators maintaining 1U racks or small-form-factor builds where vertical clearance is limited. The unit ships new and ready for direct replacement of failed 60 mm coolers.

Capacity and Headroom

The fan draws 0.35 A at 12 V for a rated 4.2 W power draw, moving air through a 60 by 25 mm frame. Ball-bearing construction sustains continuous operation in high-temperature chassis, though the single 3-pin connector provides no PWM speed control. It covers basic thermal loads but lacks headroom for overclocked or multi-core server CPUs under sustained load.

Build Integration

A standard three-pin header on the motherboard or fan controller supplies power and tachometer feedback. The 60 mm footprint fits tight brackets without blocking adjacent memory slots or PCIe cards. No LED lighting keeps the profile neutral for datacentre aesthetics, while the black finish blends with most server chassis interiors.

Poudarki

  • Ball bearing reduces wear for longer service life
  • 12 V 0.35 A 4.2 W draws little power from the system
  • 60 mm 6025 frame fits tight server chassis
  • Three-pin connector enables motherboard speed monitoring
  • Black finish matches dark builds without LED light

Specifikacije

ModelTUDC12N7S-306
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Vprašanja o tem izdelku

Will the 60 mm TUDC12N7S-306 fit the same 6025 mounting holes on my older server board?

The fan uses the standard 60 × 25 mm square frame, so it aligns with legacy 6025 mounting patterns found on many older server boards.

How can I confirm the 3-pin TUDC12N7S-306 is spinning at the correct speed after installation?

Connect the 3-pin header to the motherboard and monitor the RPM reading in BIOS or a hardware-monitoring utility; a steady value indicates normal operation.

Does the TUDC12N7S-306 package include mounting screws or a heatsink, or must I buy them separately?

The unit is supplied as a fan only — no screws, brackets or heatsink are included, so you will need to source mounting hardware separately.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.