Orico
Orico 0.5m USB Type-C to SATA hard drive adapter
Connects a 2.5 SATA SSD or HDD to a USB Type-C port with 5 Gbps UASP speeds and an optional 5 V power input for drives up to 6 TB
- Changer TypeUSB Type-C to SATA
Changer Type USB Type-C to SATA
- USB 2.0 to SATA
- USB 3.0 to SATA
- USB Type-C to SATA
Option 2.5in HDD/SSD
- 2.5in HDD/SSD
- With Cover
- USB 3.0 to SATA 3.0 with UASP protocol delivers up to 5Gbps bandwidth
- UASP support enables test speeds reaching 480M/s for rapid file transfers
- Reserved Type-C 5V power port allows stable operation of 6TB hard drives
- Driver-free plug-and-play works across Windows, Linux, Mac OS and Android
- Compact 0.5m cable with USB Type-C to SATA connector suits 2.5in SSD/HDD use
USB Type-C to SATA adapter
The Orico adapter connects a 2.5-inch SATA hard drive or SSD to a USB Type-C port on a laptop, desktop, tablet or phone. It is built for users who need quick access to bare drives for data recovery, backups or cloning without opening a computer case. The 0.5-metre cable keeps the setup compact on a desk or in a bag.
Thermals noise and power
The adapter draws power from the host USB port and includes a reserved Type-C 5V input for a separate supply when a drive needs more current. This arrangement lets it run a 6TB mechanical disk without instability. No fan or active cooling is present, so operation is silent and the only heat comes from the drive itself.
Sustained load behaviour
USB 3.0 to SATA 3.0 with UASP protocol supports a 5Gbps link, and the manufacturer reports a test speed of 480M/s. In practice a 1GB file can move in roughly three seconds. Performance holds steady during long transfers because the bridge chip is designed for continuous throughput rather than short bursts.
Privalumai
- USB 3.0 to SATA 3.0 with UASP protocol delivers up to 5Gbps bandwidth
- UASP support enables test speeds reaching 480M/s for rapid file transfers
- Reserved Type-C 5V power port allows stable operation of 6TB hard drives
- Driver-free plug-and-play works across Windows, Linux, Mac OS and Android
- Compact 0.5m cable with USB Type-C to SATA connector suits 2.5in SSD/HDD use
Specifikacijos
| Changer Type | USB Type-C to SATA |
|---|
Kiti šio modelio variantai
Dar 5 toje pačioje serijoje
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
Orico 0.3m USB 3.0 to SATA 2.5'' hard drive adapter
- USB 3.0 to SATA
Orico 0.3m USB Type-C to SATA hard drive adapter
- USB Type-C to SATA
Orico 0.3m USB 3.0 to SATA hard drive adapter
- USB 2.0 to SATA
Orico 0.5m USB 3.0 to SATA hard drive adapter with cover
- USB 2.0 to SATA
Klausimai apie šią prekę
How do I connect this 0.5m USB Type-C to SATA adapter to a 2.5in drive, and which step do people miss?
Plug the SATA end into the 2.5in drive, connect the USB-C end to the host, then use the reserved Type-C 5V power port if the drive needs extra current.
What maintenance or replacement will this adapter need over time?
No scheduled maintenance; replace the cable if the USB-C or SATA connectors become loose or if the 5V power port stops supplying enough current for a 6TB drive.
What limit appears first during sustained transfers with this adapter?
The 5Gbps USB 3.0 link caps sustained throughput; real-world tests show up to 480M/s, so the bus saturates before the SATA 3.0 drive does.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








