Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Short 0.5 m USB-C to SATA adapter cable with a small power port, black finish

Orico

Orico 0.5m USB Type-C to SATA hard drive adapter

SKU CH-Z1CE-8WBNA MPN 0.5m

Connects a 2.5 SATA SSD or HDD to a USB Type-C port with 5 Gbps UASP speeds and an optional 5 V power input for drives up to 6 TB

  • Changer TypeUSB Type-C to SATA

Changer Type USB Type-C to SATA

Model 0.5m

Option 2.5in HDD/SSD

  • USB 3.0 to SATA 3.0 with UASP protocol delivers up to 5Gbps bandwidth
  • UASP support enables test speeds reaching 480M/s for rapid file transfers
  • Reserved Type-C 5V power port allows stable operation of 6TB hard drives
  • Driver-free plug-and-play works across Windows, Linux, Mac OS and Android
  • Compact 0.5m cable with USB Type-C to SATA connector suits 2.5in SSD/HDD use

USB Type-C to SATA adapter

The Orico adapter connects a 2.5-inch SATA hard drive or SSD to a USB Type-C port on a laptop, desktop, tablet or phone. It is built for users who need quick access to bare drives for data recovery, backups or cloning without opening a computer case. The 0.5-metre cable keeps the setup compact on a desk or in a bag.

Thermals noise and power

The adapter draws power from the host USB port and includes a reserved Type-C 5V input for a separate supply when a drive needs more current. This arrangement lets it run a 6TB mechanical disk without instability. No fan or active cooling is present, so operation is silent and the only heat comes from the drive itself.

Sustained load behaviour

USB 3.0 to SATA 3.0 with UASP protocol supports a 5Gbps link, and the manufacturer reports a test speed of 480M/s. In practice a 1GB file can move in roughly three seconds. Performance holds steady during long transfers because the bridge chip is designed for continuous throughput rather than short bursts.

Kohokohdat

  • USB 3.0 to SATA 3.0 with UASP protocol delivers up to 5Gbps bandwidth
  • UASP support enables test speeds reaching 480M/s for rapid file transfers
  • Reserved Type-C 5V power port allows stable operation of 6TB hard drives
  • Driver-free plug-and-play works across Windows, Linux, Mac OS and Android
  • Compact 0.5m cable with USB Type-C to SATA connector suits 2.5in SSD/HDD use

Tekniset tiedot

Changer TypeUSB Type-C to SATA

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I connect this 0.5m USB Type-C to SATA adapter to a 2.5in drive, and which step do people miss?

Plug the SATA end into the 2.5in drive, connect the USB-C end to the host, then use the reserved Type-C 5V power port if the drive needs extra current.

What maintenance or replacement will this adapter need over time?

No scheduled maintenance; replace the cable if the USB-C or SATA connectors become loose or if the 5V power port stops supplying enough current for a 6TB drive.

What limit appears first during sustained transfers with this adapter?

The 5Gbps USB 3.0 link caps sustained throughput; real-world tests show up to 480M/s, so the bus saturates before the SATA 3.0 drive does.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.