Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Orico

Orico USB 3.0 to SATA Adapter Cable 2.5in 1m

SKU CH-99AT-332MR

Connects a 2.5-inch SATA drive via USB 3.0 with UASP for up to 5Gbps, includes a Type-C 5V power port for larger drives, and works driver-free on Windows, Linux, Mac and Android

  • Changer TypeUSB 2.0 to SATA

Changer Type USB 2.0 to SATA

Model 1m

Option 2.5in HDD/SSD

  • Connect 2.5in SATA drives via USB 3.0
  • UASP protocol enables up to 5Gbps transfer speed
  • Type-C 5V power port supports drives up to 6TB
  • Driver-free plug-and-play on Windows Linux Mac Android
  • 1m cable length for flexible drive placement

Adapter for 2.5in SATA Drives

This USB 3.0 to SATA adapter cable connects a 2.5in SATA hard drive or SSD to a computer. It supports the UASP protocol for faster data transfer and includes a Type-C 5V power port to drive larger capacities up to 6TB. The cable length is 1m and requires no driver installation.

Suits Laptop Drive Access, Not Desktop Bays

It suits users who need to retrieve data from a laptop drive, clone an SSD or back up files without opening a desktop case. The adapter is limited to 2.5in form-factor drives, so builders who need to connect 3.5in desktop drives or install a drive internally should look at a different solution.

USB 3.0 Interface with UASP

The single specification that decides fit is the USB 3.0 interface combined with UASP support, which enables tested speeds up to 480M/s. If the host port is only USB 2.0, the adapter will still work but transfer rates will be far lower.

Kohokohdat

  • Connect 2.5in SATA drives via USB 3.0
  • UASP protocol enables up to 5Gbps transfer speed
  • Type-C 5V power port supports drives up to 6TB
  • Driver-free plug-and-play on Windows Linux Mac Android
  • 1m cable length for flexible drive placement

Tekniset tiedot

Changer TypeUSB 2.0 to SATA

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the 5Gbps USB 3.0 rating mean when I connect a 2.5in SATA drive?

The adapter uses USB 3.0 to SATA 3.0 with UASP protocol, and test speeds can reach 480M/s, so a 1GB file transfers in about three seconds.

How does the USB 2.0 to SATA changer type limit performance?

The changer type is USB 2.0 to SATA, which caps the link at 480Mbps, so sustained throughput will be far below the 5Gbps USB 3.0 ceiling.

What does the cable need to power a 2.5in drive up to 6TB?

A reserved Type-C 5V power supply port is provided; plug a 5V source into that port to drive larger 2.5in SATA HDDs or SSDs stably.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.