Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Orico

Orico 0.5m USB Type-C to SATA 2.5 hard drive adapter

SKU CH-R758-6CS2K MPN 0.5m

Connects a 2.5" SATA drive via USB Type-C with a 0.5m cable, supporting 5Gbps speeds and UASP for fast transfers up to 480M/s

  • Changer TypeUSB Type-C to SATA

Changer Type USB Type-C to SATA

Model 0.5m

Option With Cover

  • Connect 2.5″ SATA drives via USB-C
  • Extra 5V power port supports up to 6TB drives
  • UASP protocol delivers up to 5Gbps transfer speed
  • Tested at 480MB/s for fast file moves
  • Driver-free on Windows, Linux, macOS and Android

USB-C to SATA 2.5 adapter for external drives

Connect a 2.5 inch SATA HDD or SSD to a USB Type-C port on a laptop, desktop or Android device. The cable is 0.5m long and includes a protective cover for the drive connector. It is built for quick data access, drive cloning or backup tasks without opening the computer case.

Check your drive and port before ordering

The adapter accepts only 2.5 inch SATA drives and does not support 3.5 inch units. Your host must provide a USB Type-C socket that can deliver enough bus power for the connected drive. A reserved Type-C 5V power input is available if the drive draws more current than the port supplies.

Sustained transfer with UASP protocol

USB 3.0 to SATA 3.0 with UASP enables speeds up to 5Gbps and tested throughput of 480M/s. The controller maintains stable data transmission during long copy sessions and can drive a 6TB hard disk without thermal throttling. Drive-free plug-and-play operation works across Windows, Linux, Mac OS and Android.

Kohokohdat

  • Connect 2.5″ SATA drives via USB-C
  • Extra 5V power port supports up to 6TB drives
  • UASP protocol delivers up to 5Gbps transfer speed
  • Tested at 480MB/s for fast file moves
  • Driver-free on Windows, Linux, macOS and Android

Tekniset tiedot

Changer TypeUSB Type-C to SATA

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What comes in the box with the Orico 0.5m USB Type-C to SATA adapter and do I need to buy anything else?

The adapter cable is supplied with a protective cover. A separate 5 V power source is only required if the connected 2.5" drive exceeds the bus-power limit.

How do I decide which capacity of 2.5" SATA drive to use with this adapter?

The built-in Type-C 5 V power port lets the adapter run drives up to 6 TB, so any 2.5" SATA SSD or HDD within that capacity will work without an extra power brick.

What does the 5 Gbps headline speed mean when I copy files to a real drive?

Real-world testing shows sequential transfers up to 480 MB/s, so a 1 GB file moves in roughly three seconds when UASP is active on a USB 3.0 host.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.