Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black USB 3.0 to SATA adapter cable with protective cover for 2.5 inch drives

Orico

Orico USB 3.0 to SATA 2.5" Adapter with Cover

SKU CH-F1DT-VZGEK

Connects a 2.5" SATA drive via USB 3.0 with UASP for speeds up to 480 MB/s, includes a Type-C power port for larger drives and works driver-free on Windows, Linux, Mac and Android

  • Changer TypeUSB 3.0 to SATA

Changer Type USB 3.0 to SATA

Model 1m

Option With Cover

  • USB 3.0 with UASP reaches 5 Gbps for rapid file moves
  • Tested throughput hits 480 MB/s so 1 GB transfers in about three seconds
  • Type-C 5 V power port supports drives up to 6 TB without extra adapters
  • Driver-free plug-and-play works on Windows, Linux, macOS and Android
  • Fits 2.5-inch SATA HDDs and SSDs with included protective cover

USB 3.0 to SATA adapter for 2.5 drives

This adapter connects a 2.5 inch SATA hard drive or SSD to a USB 3.0 port. It includes a protective cover and a reserved Type-C 5V power supply port that supports drives up to 6TB. The device uses the UASP protocol for stable data transmission. It requires no drivers and works immediately on Windows, Linux, Mac OS and Android.

Suits users adding external storage via USB

It suits anyone who wants to access a 2.5 inch SATA drive through a USB 3.0 connection without installing drivers. The Type-C power port helps run larger capacity drives reliably. Builders who need to connect 3.5 inch drives or who require an internal SATA connection should look at other solutions. The adapter is limited to the 2.5 inch form factor and USB 3.0 host ports.

5Gbps USB 3.0 interface with UASP

The single specification that decides compatibility is the USB 3.0 to SATA 3.0 interface with UASP protocol, rated at 5Gbps. Tested transfer speeds reach 480M/s, allowing 1G transfer in roughly 3 seconds. This determines whether your host port and drive can achieve the expected performance.

Kohokohdat

  • USB 3.0 with UASP reaches 5 Gbps for rapid file moves
  • Tested throughput hits 480 MB/s so 1 GB transfers in about three seconds
  • Type-C 5 V power port supports drives up to 6 TB without extra adapters
  • Driver-free plug-and-play works on Windows, Linux, macOS and Android
  • Fits 2.5-inch SATA HDDs and SSDs with included protective cover

Tekniset tiedot

Changer TypeUSB 3.0 to SATA

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the adapter include a power supply or do I need to buy one separately to run a 6TB 2.5" drive?

A reserved Type-C 5V power port is built in; the adapter can drive a 6TB 2.5" SATA drive without an extra power brick, but a USB-C power source is not included.

Which SATA revision and protocol does this adapter use for a 2.5" SSD?

It connects via USB 3.0 to SATA 3.0 with UASP, so a 2.5" SATA SSD will operate at the SATA 3.0 link rate.

What does the 5Gbps headline speed mean for real file copies on a 2.5" SATA drive?

The 5Gbps is the USB 3.0 bus ceiling; tested throughput reaches 480M/s, so large sequential transfers on a 2.5" SATA drive will top out near that figure.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.