Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

Orico

Orico USB 3.0 to SATA 2.5" Adapter with Cover

SKU CH-F1DT-VZGEK

Connects a 2.5" SATA drive via USB 3.0 with UASP for speeds up to 480 MB/s, includes a Type-C power port for larger drives and works driver-free on Windows, Linux, Mac and Android

  • Changer TypeUSB 3.0 to SATA

Changer Type USB 3.0 to SATA

Model 1m

Option With Cover

  • USB 3.0 with UASP reaches 5 Gbps for rapid file moves
  • Tested throughput hits 480 MB/s so 1 GB transfers in about three seconds
  • Type-C 5 V power port supports drives up to 6 TB without extra adapters
  • Driver-free plug-and-play works on Windows, Linux, macOS and Android
  • Fits 2.5-inch SATA HDDs and SSDs with included protective cover

USB 3.0 to SATA adapter for 2.5 drives

This adapter connects a 2.5 inch SATA hard drive or SSD to a USB 3.0 port. It includes a protective cover and a reserved Type-C 5V power supply port that supports drives up to 6TB. The device uses the UASP protocol for stable data transmission. It requires no drivers and works immediately on Windows, Linux, Mac OS and Android.

Suits users adding external storage via USB

It suits anyone who wants to access a 2.5 inch SATA drive through a USB 3.0 connection without installing drivers. The Type-C power port helps run larger capacity drives reliably. Builders who need to connect 3.5 inch drives or who require an internal SATA connection should look at other solutions. The adapter is limited to the 2.5 inch form factor and USB 3.0 host ports.

5Gbps USB 3.0 interface with UASP

The single specification that decides compatibility is the USB 3.0 to SATA 3.0 interface with UASP protocol, rated at 5Gbps. Tested transfer speeds reach 480M/s, allowing 1G transfer in roughly 3 seconds. This determines whether your host port and drive can achieve the expected performance.

Punti di forza

  • USB 3.0 with UASP reaches 5 Gbps for rapid file moves
  • Tested throughput hits 480 MB/s so 1 GB transfers in about three seconds
  • Type-C 5 V power port supports drives up to 6 TB without extra adapters
  • Driver-free plug-and-play works on Windows, Linux, macOS and Android
  • Fits 2.5-inch SATA HDDs and SSDs with included protective cover

Caratteristiche tecniche

Changer TypeUSB 3.0 to SATA

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Does the adapter include a power supply or do I need to buy one separately to run a 6TB 2.5" drive?

A reserved Type-C 5V power port is built in; the adapter can drive a 6TB 2.5" SATA drive without an extra power brick, but a USB-C power source is not included.

Which SATA revision and protocol does this adapter use for a 2.5" SSD?

It connects via USB 3.0 to SATA 3.0 with UASP, so a 2.5" SATA SSD will operate at the SATA 3.0 link rate.

What does the 5Gbps headline speed mean for real file copies on a 2.5" SATA drive?

The 5Gbps is the USB 3.0 bus ceiling; tested throughput reaches 480M/s, so large sequential transfers on a 2.5" SATA drive will top out near that figure.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.