Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black USB 3.0 to SATA adapter cable with protective cover for 2.5 inch drives

Orico

Orico USB 3.0 to SATA 2.5" Adapter with Cover

SKU CH-F1DT-VZGEK

Connects a 2.5" SATA drive via USB 3.0 with UASP for speeds up to 480 MB/s, includes a Type-C power port for larger drives and works driver-free on Windows, Linux, Mac and Android

  • Changer TypeUSB 3.0 to SATA

Changer Type USB 3.0 to SATA

Model 1m

Option With Cover

  • USB 3.0 with UASP reaches 5 Gbps for rapid file moves
  • Tested throughput hits 480 MB/s so 1 GB transfers in about three seconds
  • Type-C 5 V power port supports drives up to 6 TB without extra adapters
  • Driver-free plug-and-play works on Windows, Linux, macOS and Android
  • Fits 2.5-inch SATA HDDs and SSDs with included protective cover

USB 3.0 to SATA adapter for 2.5 drives

This adapter connects a 2.5 inch SATA hard drive or SSD to a USB 3.0 port. It includes a protective cover and a reserved Type-C 5V power supply port that supports drives up to 6TB. The device uses the UASP protocol for stable data transmission. It requires no drivers and works immediately on Windows, Linux, Mac OS and Android.

Suits users adding external storage via USB

It suits anyone who wants to access a 2.5 inch SATA drive through a USB 3.0 connection without installing drivers. The Type-C power port helps run larger capacity drives reliably. Builders who need to connect 3.5 inch drives or who require an internal SATA connection should look at other solutions. The adapter is limited to the 2.5 inch form factor and USB 3.0 host ports.

5Gbps USB 3.0 interface with UASP

The single specification that decides compatibility is the USB 3.0 to SATA 3.0 interface with UASP protocol, rated at 5Gbps. Tested transfer speeds reach 480M/s, allowing 1G transfer in roughly 3 seconds. This determines whether your host port and drive can achieve the expected performance.

Priekšrocības

  • USB 3.0 with UASP reaches 5 Gbps for rapid file moves
  • Tested throughput hits 480 MB/s so 1 GB transfers in about three seconds
  • Type-C 5 V power port supports drives up to 6 TB without extra adapters
  • Driver-free plug-and-play works on Windows, Linux, macOS and Android
  • Fits 2.5-inch SATA HDDs and SSDs with included protective cover

Specifikācijas

Changer TypeUSB 3.0 to SATA

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the adapter include a power supply or do I need to buy one separately to run a 6TB 2.5" drive?

A reserved Type-C 5V power port is built in; the adapter can drive a 6TB 2.5" SATA drive without an extra power brick, but a USB-C power source is not included.

Which SATA revision and protocol does this adapter use for a 2.5" SSD?

It connects via USB 3.0 to SATA 3.0 with UASP, so a 2.5" SATA SSD will operate at the SATA 3.0 link rate.

What does the 5Gbps headline speed mean for real file copies on a 2.5" SATA drive?

The 5Gbps is the USB 3.0 bus ceiling; tested throughput reaches 480M/s, so large sequential transfers on a 2.5" SATA drive will top out near that figure.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.