Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

Orico

Orico USB 3.0 to SATA 2.5" Adapter with Cover

SKU CH-F1DT-VZGEK

Connects a 2.5" SATA drive via USB 3.0 with UASP for speeds up to 480 MB/s, includes a Type-C power port for larger drives and works driver-free on Windows, Linux, Mac and Android

  • Changer TypeUSB 3.0 to SATA

Changer Type USB 3.0 to SATA

Model 1m

Option With Cover

  • USB 3.0 with UASP reaches 5 Gbps for rapid file moves
  • Tested throughput hits 480 MB/s so 1 GB transfers in about three seconds
  • Type-C 5 V power port supports drives up to 6 TB without extra adapters
  • Driver-free plug-and-play works on Windows, Linux, macOS and Android
  • Fits 2.5-inch SATA HDDs and SSDs with included protective cover

USB 3.0 to SATA adapter for 2.5 drives

This adapter connects a 2.5 inch SATA hard drive or SSD to a USB 3.0 port. It includes a protective cover and a reserved Type-C 5V power supply port that supports drives up to 6TB. The device uses the UASP protocol for stable data transmission. It requires no drivers and works immediately on Windows, Linux, Mac OS and Android.

Suits users adding external storage via USB

It suits anyone who wants to access a 2.5 inch SATA drive through a USB 3.0 connection without installing drivers. The Type-C power port helps run larger capacity drives reliably. Builders who need to connect 3.5 inch drives or who require an internal SATA connection should look at other solutions. The adapter is limited to the 2.5 inch form factor and USB 3.0 host ports.

5Gbps USB 3.0 interface with UASP

The single specification that decides compatibility is the USB 3.0 to SATA 3.0 interface with UASP protocol, rated at 5Gbps. Tested transfer speeds reach 480M/s, allowing 1G transfer in roughly 3 seconds. This determines whether your host port and drive can achieve the expected performance.

Puncte forte

  • USB 3.0 with UASP reaches 5 Gbps for rapid file moves
  • Tested throughput hits 480 MB/s so 1 GB transfers in about three seconds
  • Type-C 5 V power port supports drives up to 6 TB without extra adapters
  • Driver-free plug-and-play works on Windows, Linux, macOS and Android
  • Fits 2.5-inch SATA HDDs and SSDs with included protective cover

Specificații

Changer TypeUSB 3.0 to SATA

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the adapter include a power supply or do I need to buy one separately to run a 6TB 2.5" drive?

A reserved Type-C 5V power port is built in; the adapter can drive a 6TB 2.5" SATA drive without an extra power brick, but a USB-C power source is not included.

Which SATA revision and protocol does this adapter use for a 2.5" SSD?

It connects via USB 3.0 to SATA 3.0 with UASP, so a 2.5" SATA SSD will operate at the SATA 3.0 link rate.

What does the 5Gbps headline speed mean for real file copies on a 2.5" SATA drive?

The 5Gbps is the USB 3.0 bus ceiling; tested throughput reaches 480M/s, so large sequential transfers on a 2.5" SATA drive will top out near that figure.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.