Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

Orico

Orico USB 3.0 to SATA Adapter Cable 2.5in 1m

SKU CH-99AT-332MR

Connects a 2.5-inch SATA drive via USB 3.0 with UASP for up to 5Gbps, includes a Type-C 5V power port for larger drives, and works driver-free on Windows, Linux, Mac and Android

  • Changer TypeUSB 2.0 to SATA

Changer Type USB 2.0 to SATA

Model 1m

Option 2.5in HDD/SSD

  • Connect 2.5in SATA drives via USB 3.0
  • UASP protocol enables up to 5Gbps transfer speed
  • Type-C 5V power port supports drives up to 6TB
  • Driver-free plug-and-play on Windows Linux Mac Android
  • 1m cable length for flexible drive placement

Adapter for 2.5in SATA Drives

This USB 3.0 to SATA adapter cable connects a 2.5in SATA hard drive or SSD to a computer. It supports the UASP protocol for faster data transfer and includes a Type-C 5V power port to drive larger capacities up to 6TB. The cable length is 1m and requires no driver installation.

Suits Laptop Drive Access, Not Desktop Bays

It suits users who need to retrieve data from a laptop drive, clone an SSD or back up files without opening a desktop case. The adapter is limited to 2.5in form-factor drives, so builders who need to connect 3.5in desktop drives or install a drive internally should look at a different solution.

USB 3.0 Interface with UASP

The single specification that decides fit is the USB 3.0 interface combined with UASP support, which enables tested speeds up to 480M/s. If the host port is only USB 2.0, the adapter will still work but transfer rates will be far lower.

Přednosti

  • Connect 2.5in SATA drives via USB 3.0
  • UASP protocol enables up to 5Gbps transfer speed
  • Type-C 5V power port supports drives up to 6TB
  • Driver-free plug-and-play on Windows Linux Mac Android
  • 1m cable length for flexible drive placement

Specifikace

Changer TypeUSB 2.0 to SATA

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What does the 5Gbps USB 3.0 rating mean when I connect a 2.5in SATA drive?

The adapter uses USB 3.0 to SATA 3.0 with UASP protocol, and test speeds can reach 480M/s, so a 1GB file transfers in about three seconds.

How does the USB 2.0 to SATA changer type limit performance?

The changer type is USB 2.0 to SATA, which caps the link at 480Mbps, so sustained throughput will be far below the 5Gbps USB 3.0 ceiling.

What does the cable need to power a 2.5in drive up to 6TB?

A reserved Type-C 5V power supply port is provided; plug a 5V source into that port to drive larger 2.5in SATA HDDs or SSDs stably.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.