Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
12-strand OM3 fiber pigtail with LC UPC connectors, orange or aqua jacket

Other Electricities

Other Electricities 12 Strand 50/125 OM3 3m LC UPC Fanout Fiber Pigtail

SKU CH-YKAV-BXEGJ

A 12-strand 50/125 OM3 multimode fan-out pigtail with LC UPC connectors on one end and unterminated fibres on the other, rated for 850 nm and 1310 nm with .3 dB insertion loss and >1000 mating cycles

  • TypeRack
  • 12-fiber bundle simplifies high-density patching
  • OM3 50/125 µm multimode supports 850 nm and 1310 nm links
  • LC UPC connectors deliver 0.3 dB typical insertion loss
  • Fan-out design eases fusion splicing inside enclosures
  • Rated for more than 1000 mating cycles

12-Strand OM3 Multimode Pigtail

This 12-strand 50/125 OM3 fiber pigtail is built for fusion splicing inside rack-mount enclosures. It serves installers who need pre-terminated LC UPC connectors on one end and bare fibers on the other for direct splicing to backbone cables.

LC UPC Connectors and Fanout Kit

The bundle ships with LC UPC connectors factory-polished to a 0.3 dB insertion loss spec at 850 nm and 1310 nm. A partial outer jacket protects the tight-buffer fibers during handling and can be stripped off to reduce bend radius when enclosure space is tight.

Fusion-Splice Installation Notes

Technicians fuse the unterminated ends to the building cable, then seat the LC plugs into adapter panels. The pigtails are rated for more than 1000 mating cycles, but dirty or damaged end-faces during splicing remain the most common cause of excess loss.

Privalumai

  • 12-fiber bundle simplifies high-density patching
  • OM3 50/125 µm multimode supports 850 nm and 1310 nm links
  • LC UPC connectors deliver 0.3 dB typical insertion loss
  • Fan-out design eases fusion splicing inside enclosures
  • Rated for more than 1000 mating cycles

Specifikacijos

TypeRack

Klausimai apie šią prekę

How many fusion splices can the 12-fibre OM3 pigtail set handle before the connectors need replacing?

The LC/UPC connectors are rated for more than 1000 mating cycles, so the fan-out assembly should survive repeated patch-panel changes without connector replacement.

What insertion-loss budget should I plan for when the 3-metre OM3 fan-out runs at 850 nm?

Each fibre shows a maximum insertion loss of 0.3 dB at 850 nm, giving a predictable loss figure for link-loss calculations.

How much heat does the 12-strand OM3 pigtail generate when light at 850 nm and 1310 nm passes through it continuously?

Passive fibre pigtails produce no measurable heat; all optical power stays in the glass core and the assembly runs at ambient temperature.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.