Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board with black memory chips and gold edge connector

OWC

OWC 16GB DDR4 2400MHz CL17 1.2V 288pin ECC RDIMM Server memory upgrade

SKU CH-CW74-6GRVR

16GB DDR4 2400MHz ECC registered DIMM for Supermicro X10 server motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • Server-grade ECC registered memory protects data integrity
  • 16 GB capacity expands server multitasking headroom
  • DDR4 2400 MHz CL17 speed matches platform spec
  • 2 V low-voltage operation reduces power draw
  • Validated for Supermicro X10DRT-H, X10DRU-X, X10DRT-L, X10DRW-E, X10DRT-LIBQ

Server ECC RDIMM for Supermicro X10

This OWC module is a 16GB DDR4 2400MHz CL17 registered DIMM built for Supermicro X10 motherboards including X10DRT-H, X10DRU-X, X10DRT-L, X10DRW-E and X10DRT-LIBQ. It operates at 1.2V with ECC and a 2Rx8 rank configuration. The 288-pin form factor fits server and workstation slots that require registered memory.

Who this suits and who should look elsewhere

System administrators upgrading or repairing the listed Supermicro platforms will find a direct replacement for Supermicro part numbers MEMDR416LCL06ER24, MEMDR416LHL03ER24 and MEMDR416LSV01ER24. Builders assembling standard desktop PCs cannot use this registered ECC memory because consumer motherboards do not support it. Buyers who need unbuffered modules for a non-server board must choose a different product type.

Deciding specification: registered ECC DDR4 2400MHz

The single specification that determines compatibility is the registered ECC DDR4 2400MHz design with a 288-pin RDIMM form factor. Only motherboards that explicitly accept registered ECC DDR4 at this speed can use this module. Systems requiring unbuffered memory or a different DDR generation will not accept it.

Privalumai

  • Server-grade ECC registered memory protects data integrity
  • 16 GB capacity expands server multitasking headroom
  • DDR4 2400 MHz CL17 speed matches platform spec
  • 2 V low-voltage operation reduces power draw
  • Validated for Supermicro X10DRT-H, X10DRU-X, X10DRT-L, X10DRW-E, X10DRT-LIBQ

Specifikacijos

BrandOWC
Part Number2R4D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X10DRT-H
Supermicro Motherboard X10DRU-X
Supermicro Motherboard X10DRT-L
Supermicro Motherboard X10DRW-E
Supermicro Motherboard X10DRT-LIBQ

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Does the DDR4 2400 PC4-19200 interface cap the module at 2400 MT/s in a Supermicro X10DRT-H board?

Yes, the module is rated DDR4 2400 PC4-19200 and will run at 2400 MT/s on the listed Supermicro boards.

What physical slot and form factor does this 288-pin ECC RDIMM need to fit?

It requires a standard 288-pin DDR4 DIMM slot; the module has no heat spreader, so it fits low-profile server chassis.

How is the 2Rx8 registered ECC DIMM installed, and what step do builders often miss?

Align the notch, press firmly until both retention clips click, and ensure the board is populated in the correct channel order for registered memory.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.