We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connector

OWC

OWC 16GB DDR4 2400MHz CL17 1.2V 288pin ECC RDIMM Server memory upgrade

SKU CH-CW74-6GRVR

16GB DDR4 2400MHz ECC registered DIMM for Supermicro X10 server motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes

Capacity 16GB

  • Server-grade ECC registered memory protects data integrity
  • 16 GB capacity expands server multitasking headroom
  • DDR4 2400 MHz CL17 speed matches platform spec
  • 2 V low-voltage operation reduces power draw
  • Validated for Supermicro X10DRT-H, X10DRU-X, X10DRT-L, X10DRW-E, X10DRT-LIBQ

Server ECC RDIMM for Supermicro X10

This OWC module is a 16GB DDR4 2400MHz CL17 registered DIMM built for Supermicro X10 motherboards including X10DRT-H, X10DRU-X, X10DRT-L, X10DRW-E and X10DRT-LIBQ. It operates at 1.2V with ECC and a 2Rx8 rank configuration. The 288-pin form factor fits server and workstation slots that require registered memory.

Who this suits and who should look elsewhere

System administrators upgrading or repairing the listed Supermicro platforms will find a direct replacement for Supermicro part numbers MEMDR416LCL06ER24, MEMDR416LHL03ER24 and MEMDR416LSV01ER24. Builders assembling standard desktop PCs cannot use this registered ECC memory because consumer motherboards do not support it. Buyers who need unbuffered modules for a non-server board must choose a different product type.

Deciding specification: registered ECC DDR4 2400MHz

The single specification that determines compatibility is the registered ECC DDR4 2400MHz design with a 288-pin RDIMM form factor. Only motherboards that explicitly accept registered ECC DDR4 at this speed can use this module. Systems requiring unbuffered memory or a different DDR generation will not accept it.

Highlights

  • Server-grade ECC registered memory protects data integrity
  • 16 GB capacity expands server multitasking headroom
  • DDR4 2400 MHz CL17 speed matches platform spec
  • 2 V low-voltage operation reduces power draw
  • Validated for Supermicro X10DRT-H, X10DRU-X, X10DRT-L, X10DRW-E, X10DRT-LIBQ

Specifications

BrandOWC
Part Number2R4D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X10DRT-H
Supermicro Motherboard X10DRU-X
Supermicro Motherboard X10DRT-L
Supermicro Motherboard X10DRW-E
Supermicro Motherboard X10DRT-LIBQ

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the DDR4 2400 PC4-19200 interface cap the module at 2400 MT/s in a Supermicro X10DRT-H board?

Yes, the module is rated DDR4 2400 PC4-19200 and will run at 2400 MT/s on the listed Supermicro boards.

What physical slot and form factor does this 288-pin ECC RDIMM need to fit?

It requires a standard 288-pin DDR4 DIMM slot; the module has no heat spreader, so it fits low-profile server chassis.

How is the 2Rx8 registered ECC DIMM installed, and what step do builders often miss?

Align the notch, press firmly until both retention clips click, and ensure the board is populated in the correct channel order for registered memory.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.