Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board with black memory chips and gold edge connector

OWC

OWC 4GB DDR3 1333 PC3-10600 CL9 1Rx8 240-pin 1.5V Non-ECC UDIMM memory upgrade for Dell OptiPlex 990

SKU CH-7BWW-QGHF5

Adds 4 GB of DDR3-1333 memory to compatible Dell OptiPlex 990 desktops

  • Capacity4GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • Adds 4GB of DDR3 memory for smoother multitasking
  • Runs at 1333MHz CL9 for responsive desktop performance
  • 5V unbuffered design keeps power draw low
  • JEDEC-standard build ensures warranty-safe operation
  • Fits Dell OptiPlex 990 Desktop, SFF, Tower and USFF

OWC 4 GB DDR3 module for Dell OptiPlex 990

This single 4 GB DDR3 1333 UDIMM is built to upgrade Dell OptiPlex 990 Desktop, SFF, Tower and USFF systems. It runs at 1.5 V with CL9 latency and uses a standard 240-pin unbuffered layout. The module is JEDEC and RoHS compliant for a warranty-safe installation.

Ideal for owners adding memory to a compatible

Buyers whose systems require ECC, registered DIMMs or a different pin count cannot use this module. It also suits only DDR3 platforms, so machines limited to other memory generations are not supported.

Deciding spec: 240-pin DDR3 1333 UDIMM at 1.5 V

If the target computer accepts a 240-pin DDR3 1333 PC3-10600 CL9 unbuffered DIMM at 1.5 V, this 4 GB stick will fit and function. Any other pin layout, voltage or speed standard means the part is incompatible.

Privalumai

  • Adds 4GB of DDR3 memory for smoother multitasking
  • Runs at 1333MHz CL9 for responsive desktop performance
  • 5V unbuffered design keeps power draw low
  • JEDEC-standard build ensures warranty-safe operation
  • Fits Dell OptiPlex 990 Desktop, SFF, Tower and USFF

Specifikacijos

BrandOWC
Part Number1U3D31R804GB
Capacity4GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 990 Desktop
Dell OptiPlex 990 SFF
Dell OptiPlex 990 Tower
Dell OptiPlex 990 USFF

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Does my Dell OptiPlex 990 need a free 240-pin DIMM slot to install this 4GB DDR3 1333 module?

Yes, this UDIMM fits a standard 240-pin DDR3 slot on any OptiPlex 990 Desktop, SFF, Tower or USFF motherboard.

Can I keep my existing PC3-10600 CL9 sticks and add this 1Rx8 1.5V module alongside them?

It will work if the other modules are also DDR3 1333 non-ECC unbuffered; mixing ranks or speeds may force the system to run at the lowest common speed.

How can I confirm the 4GB upgrade is recognised at 1333 MHz after installation?

Check the BIOS memory information screen or run CPU-Z; both should show 4GB at PC3-10600 1333 MHz CL9.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.