저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

OWC

OWC 4GB DDR3 1333 PC3-10600 CL9 1Rx8 240-pin 1.5V Non-ECC UDIMM memory upgrade for Dell OptiPlex 990

SKU CH-7BWW-QGHF5

Adds 4 GB of DDR3-1333 memory to compatible Dell OptiPlex 990 desktops

  • Capacity4GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • Adds 4GB of DDR3 memory for smoother multitasking
  • Runs at 1333MHz CL9 for responsive desktop performance
  • 5V unbuffered design keeps power draw low
  • JEDEC-standard build ensures warranty-safe operation
  • Fits Dell OptiPlex 990 Desktop, SFF, Tower and USFF

OWC 4 GB DDR3 module for Dell OptiPlex 990

This single 4 GB DDR3 1333 UDIMM is built to upgrade Dell OptiPlex 990 Desktop, SFF, Tower and USFF systems. It runs at 1.5 V with CL9 latency and uses a standard 240-pin unbuffered layout. The module is JEDEC and RoHS compliant for a warranty-safe installation.

Ideal for owners adding memory to a compatible

Buyers whose systems require ECC, registered DIMMs or a different pin count cannot use this module. It also suits only DDR3 platforms, so machines limited to other memory generations are not supported.

Deciding spec: 240-pin DDR3 1333 UDIMM at 1.5 V

If the target computer accepts a 240-pin DDR3 1333 PC3-10600 CL9 unbuffered DIMM at 1.5 V, this 4 GB stick will fit and function. Any other pin layout, voltage or speed standard means the part is incompatible.

주요 특징

  • Adds 4GB of DDR3 memory for smoother multitasking
  • Runs at 1333MHz CL9 for responsive desktop performance
  • 5V unbuffered design keeps power draw low
  • JEDEC-standard build ensures warranty-safe operation
  • Fits Dell OptiPlex 990 Desktop, SFF, Tower and USFF

사양

BrandOWC
Part Number1U3D31R804GB
Capacity4GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 990 Desktop
Dell OptiPlex 990 SFF
Dell OptiPlex 990 Tower
Dell OptiPlex 990 USFF

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Does my Dell OptiPlex 990 need a free 240-pin DIMM slot to install this 4GB DDR3 1333 module?

Yes, this UDIMM fits a standard 240-pin DDR3 slot on any OptiPlex 990 Desktop, SFF, Tower or USFF motherboard.

Can I keep my existing PC3-10600 CL9 sticks and add this 1Rx8 1.5V module alongside them?

It will work if the other modules are also DDR3 1333 non-ECC unbuffered; mixing ranks or speeds may force the system to run at the lowest common speed.

How can I confirm the 4GB upgrade is recognised at 1333 MHz after installation?

Check the BIOS memory information screen or run CPU-Z; both should show 4GB at PC3-10600 1333 MHz CL9.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.