Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board with black memory chips and gold edge connector

OWC

OWC 8GB DDR3 1600 PC3-12800 CL11 2Rx8 204-pin SODIMM memory upgrade

SKU CH-RZQ3-S4SZV

An 8 GB DDR3 1600 SODIMM for Dell OptiPlex 3020 Micro, 3030 AIO and 9010 AIO systems

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boost performance with an 8GB DDR3 1600 module
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Designed and tested to meet or exceed OEM specifications
  • Unbuffered non-ECC SODIMM runs at standard 1.5V
  • Compatible with OptiPlex 3020 Micro, 3030 AIO and 9010 AIO

8GB DDR3 1600 SODIMM for Dell OptiPlex

This 8GB DDR3 1600 PC3-12800 CL11 SODIMM is built for the Dell OptiPlex 3020 Micro, 3030 AIO and 9010 AIO. It runs at 1.5V as an unbuffered non-ECC module with a 2Rx8 layout. The 204-pin form factor fits the SO-DIMM slots in those systems.

Suits owners of the listed OptiPlex models wanting

Buyers with other Dell desktops, laptops or workstations should verify the exact part number before purchasing. The module is not ECC or registered, so it will not work in platforms that require those features. It is also unsuitable for any system that does not accept 204-pin DDR3 SODIMMs.

The 204-pin DDR3 SO-DIMM form factor decides fit

Only platforms that take 204-pin DDR3 non-ECC SODIMMs at 1.5V can use this module. The 2Rx8 organisation and CL11 timing are fixed by the specification. Check the service manual of your OptiPlex to confirm the slot type and maximum capacity per slot.

Privalumai

  • Boost performance with an 8GB DDR3 1600 module
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Designed and tested to meet or exceed OEM specifications
  • Unbuffered non-ECC SODIMM runs at standard 1.5V
  • Compatible with OptiPlex 3020 Micro, 3030 AIO and 9010 AIO

Specifikacijos

BrandOWC
Part Number1S6D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 3020 Micro
Dell OptiPlex 3030 AIO
Dell OptiPlex 9010 AIO

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What does the 1600 MHz rating mean once the module is installed in a Dell OptiPlex 3020 Micro?

The module runs at 1600 MHz DDR3 speed, delivering PC3-12800 bandwidth with CL11 latency for responsive multitasking in the OptiPlex 3020 Micro.

How does the 204-pin SODIMM interface limit performance in these systems?

The 204-pin SODIMM form factor fits the OptiPlex 3020 Micro, 3030 AIO and 9010 AIO slots and operates at the standard 1.5 V DDR3 voltage.

What physical space is needed to install this 8 GB stick in an OptiPlex 9010 AIO?

The single 204-pin SODIMM module installs directly into the memory slot without a heat spreader, requiring only the standard SODIMM clearance inside the chassis.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.