Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green circuit board with black memory chips and gold edge connector

OWC

OWC 8GB DDR3 1600 PC3-12800 CL11 2Rx8 204-pin SODIMM memory upgrade

SKU CH-RZQ3-S4SZV

An 8 GB DDR3 1600 SODIMM for Dell OptiPlex 3020 Micro, 3030 AIO and 9010 AIO systems

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boost performance with an 8GB DDR3 1600 module
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Designed and tested to meet or exceed OEM specifications
  • Unbuffered non-ECC SODIMM runs at standard 1.5V
  • Compatible with OptiPlex 3020 Micro, 3030 AIO and 9010 AIO

8GB DDR3 1600 SODIMM for Dell OptiPlex

This 8GB DDR3 1600 PC3-12800 CL11 SODIMM is built for the Dell OptiPlex 3020 Micro, 3030 AIO and 9010 AIO. It runs at 1.5V as an unbuffered non-ECC module with a 2Rx8 layout. The 204-pin form factor fits the SO-DIMM slots in those systems.

Suits owners of the listed OptiPlex models wanting

Buyers with other Dell desktops, laptops or workstations should verify the exact part number before purchasing. The module is not ECC or registered, so it will not work in platforms that require those features. It is also unsuitable for any system that does not accept 204-pin DDR3 SODIMMs.

The 204-pin DDR3 SO-DIMM form factor decides fit

Only platforms that take 204-pin DDR3 non-ECC SODIMMs at 1.5V can use this module. The 2Rx8 organisation and CL11 timing are fixed by the specification. Check the service manual of your OptiPlex to confirm the slot type and maximum capacity per slot.

Poudarki

  • Boost performance with an 8GB DDR3 1600 module
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Designed and tested to meet or exceed OEM specifications
  • Unbuffered non-ECC SODIMM runs at standard 1.5V
  • Compatible with OptiPlex 3020 Micro, 3030 AIO and 9010 AIO

Specifikacije

BrandOWC
Part Number1S6D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 3020 Micro
Dell OptiPlex 3030 AIO
Dell OptiPlex 9010 AIO

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What does the 1600 MHz rating mean once the module is installed in a Dell OptiPlex 3020 Micro?

The module runs at 1600 MHz DDR3 speed, delivering PC3-12800 bandwidth with CL11 latency for responsive multitasking in the OptiPlex 3020 Micro.

How does the 204-pin SODIMM interface limit performance in these systems?

The 204-pin SODIMM form factor fits the OptiPlex 3020 Micro, 3030 AIO and 9010 AIO slots and operates at the standard 1.5 V DDR3 voltage.

What physical space is needed to install this 8 GB stick in an OptiPlex 9010 AIO?

The single 204-pin SODIMM module installs directly into the memory slot without a heat spreader, requiring only the standard SODIMM clearance inside the chassis.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.