Phanteks
Phanteks Glacier G40 RTX 4090 GPU Block PH-GB4090AS_BK01_BP DIY Cooling
Full-cover copper cold plate with 0.6 mm fin array and digital RGB lighting, custom-milled for ASUS ROG STRIX and TUF Gaming RTX 4090 cards
- TypeVGA Block & Cooler
- Block Dim.Water Block Dimensions (LxWxH) 11.02 x 5.17 x 1 in (280 x 13
- Block MaterialAluminum
- Custom-designed for ASUS ROG STRIX and TUF RTX 4090 cards
- 10 mm pure copper cold plate cools GPU, memory and power delivery
- 6 mm micro-fin array with jet plate maximises heat transfer
- Viton rubber washers maintain seal force to prevent leaks
- Low-profile fittings and included support bracket improve case clearance and prevent sag
Custom ASUS RTX 4090 Water Block
The Phanteks Glacier G40 is a full-cover nickel-plated copper block engineered specifically for ASUS ROG STRIX and TUF Gaming RTX 4090 graphics cards. It replaces the factory air cooler to enable high-performance liquid cooling in a custom loop. Integrated digital-RGB lighting uses standard JST connectors for synchronisation with Phanteks D-RGB ecosystems and compatible motherboards. A low-profile fitting layout and included GPU support bracket improve chassis clearance and prevent card sag.
10mm Copper Core With 0.6mm Fin Array
A 10 mm pure copper cold plate sits directly over the GPU die, memory modules and power delivery components. A fine 0.6 mm micro-fin array paired with a clear jet plate targets coolant flow at the hottest surfaces for sustained thermal transfer during extended compute or gaming sessions. Viton rubber washers maintain consistent seal force to prevent leaks under continuous pressure cycling. The cast acrylic top and black aluminium cover plates complete the structural assembly.
G1/4 Thread Clearance And D-RGB Ecosystem
Standard G1/4 threaded ports are positioned low on the block to maximise tubing clearance in compact builds, limiting routing options to straight or low-angle fittings. Digital-RGB control requires a 5 V addressable header or Phanteks controller; the block cannot be driven by legacy 12 V RGB headers. The aluminium cover plates add rigidity but do not serve as primary cooling surfaces, so thermal capacity remains bound to the copper core and loop flow rate.
Privalumai
- Custom-designed for ASUS ROG STRIX and TUF RTX 4090 cards
- 10 mm pure copper cold plate cools GPU, memory and power delivery
- 6 mm micro-fin array with jet plate maximises heat transfer
- Viton rubber washers maintain seal force to prevent leaks
- Low-profile fittings and included support bracket improve case clearance and prevent sag
Specifikacijos
| Brand | Phanteks |
|---|---|
| Model | Glacier G40 ASUS GPU Block |
| Part Number | PH-GB4090AS_BK01_BP |
| Type | VGA Block & Cooler |
| Block Dim. | Water Block Dimensions (LxWxH) 11.02 x 5.17 x 1 in (280 x 131.244 x 26 mm) |
| Block Material | Aluminum |
| Siuntos svoris | 1.93 kg |
| Pakuotės dydis | 353 × 190 × 70 mm |
Klausimai apie šią prekę
How much heat does the 10mm copper cold plate and .6mm fin array move when the RTX 4090 runs all day?
The 10mm pure copper base with a .6mm fin array and clear jetplate sits directly over the GPU die, memory and power components to transfer heat into your loop continuously.
Which fittings and coolant parts must I already own to install this block?
You need two G1/4 fittings, tubing, a pump, reservoir, radiator and coolant — the block includes low-profile ports and a Viton washer but supplies no other loop components.
Will the 280mm long block clear the back-plate and Digital-RGB header on my older Phanteks D-RGB gear?
The 280 x 131.244 x 26 mm block includes a GPU support bracket and standard JST D-RGB connectors that sync with existing Phanteks D-RGB products and compatible motherboards.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001049BTC
Yra sandėlyje