Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Transparent acrylic case for Raspberry Pi 4 with open GPIO and port access

Pimoroni

Pimoroni Pibow Coupé 4 Ninja Raspberry Pi 4 case

SKU CH-E0DY-3EJZM

A slim, transparent acrylic case that protects a Raspberry Pi 4 while keeping every port and the GPIO header accessible

  • Protects the Raspberry Pi 4 with five cast acrylic layers
  • Transparent top and base keep the board visible inside
  • Cut-out fits a 40 x 30 mm heatsink or Fan SHIM
  • Slim profile stays fully HAT-compatible
  • Laser-etched port labels and open GPIO leave every port accessible

Raspberry Pi 4 case with transparent layers

The Pimoroni Pibow Coupé 4 Ninja is a five-layer cast acrylic enclosure built exclusively for the Raspberry Pi 4. Transparent top and base panels keep the board visible while protecting it during hacking and tinkering sessions.

GPIO and port access with heatsink clearance

A laser-etched GPIO cut-out and labelled port openings leave every primary connection accessible, including the camera and display ports. The lid includes a cutout sized 40 by 30 millimetres for a heatsink or Fan SHIM.

Fully HAT-compatible slim profile

The super-slimline stack adds minimal bulk and works with standard standoffs, so any HAT can be mounted without interference. Part number 463 identifies this Ninja colour variant for the Raspberry Pi 4 only.

Privalumai

  • Protects the Raspberry Pi 4 with five cast acrylic layers
  • Transparent top and base keep the board visible inside
  • Cut-out fits a 40 x 30 mm heatsink or Fan SHIM
  • Slim profile stays fully HAT-compatible
  • Laser-etched port labels and open GPIO leave every port accessible

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

Should I pick the Ninja version or the Red version?

Both share the same five-layer acrylic build and clear top and base; the difference is the colour of the middle layers, so choose the shade you prefer for your Pi 4.

Does the 40 × 30 mm heatsink cut-out leave enough room for a Fan SHIM?

The lid cut-out is sized for a 40 by 30 mm heatsink or a Fan SHIM, so either cooling option fits without modification.

Will the GPIO cut-out and port labels still work when a HAT is stacked on top?

The case is fully HAT-compatible; the GPIO cut-out and laser-etched labels remain accessible with a HAT fitted.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.