Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Transparent acrylic case for Raspberry Pi 4 with open GPIO and port access

Pimoroni

Pimoroni Pibow Coupé 4 Ninja Raspberry Pi 4 case

SKU CH-E0DY-3EJZM

A slim, transparent acrylic case that protects a Raspberry Pi 4 while keeping every port and the GPIO header accessible

  • Protects the Raspberry Pi 4 with five cast acrylic layers
  • Transparent top and base keep the board visible inside
  • Cut-out fits a 40 x 30 mm heatsink or Fan SHIM
  • Slim profile stays fully HAT-compatible
  • Laser-etched port labels and open GPIO leave every port accessible

Raspberry Pi 4 case with transparent layers

The Pimoroni Pibow Coupé 4 Ninja is a five-layer cast acrylic enclosure built exclusively for the Raspberry Pi 4. Transparent top and base panels keep the board visible while protecting it during hacking and tinkering sessions.

GPIO and port access with heatsink clearance

A laser-etched GPIO cut-out and labelled port openings leave every primary connection accessible, including the camera and display ports. The lid includes a cutout sized 40 by 30 millimetres for a heatsink or Fan SHIM.

Fully HAT-compatible slim profile

The super-slimline stack adds minimal bulk and works with standard standoffs, so any HAT can be mounted without interference. Part number 463 identifies this Ninja colour variant for the Raspberry Pi 4 only.

Punti di forza

  • Protects the Raspberry Pi 4 with five cast acrylic layers
  • Transparent top and base keep the board visible inside
  • Cut-out fits a 40 x 30 mm heatsink or Fan SHIM
  • Slim profile stays fully HAT-compatible
  • Laser-etched port labels and open GPIO leave every port accessible

Caratteristiche tecniche

Nessuna caratteristica ancora pubblicata per questo articolo.

Domande su questo articolo

Should I pick the Ninja version or the Red version?

Both share the same five-layer acrylic build and clear top and base; the difference is the colour of the middle layers, so choose the shade you prefer for your Pi 4.

Does the 40 × 30 mm heatsink cut-out leave enough room for a Fan SHIM?

The lid cut-out is sized for a 40 by 30 mm heatsink or a Fan SHIM, so either cooling option fits without modification.

Will the GPIO cut-out and port labels still work when a HAT is stacked on top?

The case is fully HAT-compatible; the GPIO cut-out and laser-etched labels remain accessible with a HAT fitted.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.