Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black plastic 3.5 inch hard drive mounting tray

Qnap

Qnap TRAY-35-NK-BLK06 3.5" HDD Tray for TS-473, TS-673, TS-873, TS-1677X

SKU CH-0RZM-5BWZM MPN TRAY-35-NK-BLK06

3.5-inch drive tray compatible with TS-473, TS-673, TS-873 and TS-1677X NAS models

  • TypeAccessory
  • FeaturesHDD tray for TS-473, TS-673, TS-873, TS-1677X
  • Fits 3.5" drives in compatible QNAP NAS models
  • Tool-less drive mounting speeds up installation
  • Supports TS-473, TS-673, TS-873 and TS-1677X units
  • Durable construction protects drives during operation
  • Official QNAP accessory ensures exact fit

Compatible NAS Models

This Qnap TRAY-35-NK-BLK06 is a drive mounting tray designed for TS-473, TS-673, TS-873 and TS-1677X desktop NAS units. It provides the mechanical interface needed to install a 3.5 inch hard drive into the corresponding drive bay. The accessory is supplied new and ready for immediate installation.

Installers and Expanders

System builders adding storage capacity to the listed Qnap models will find this tray essential for each additional drive. Users of other NAS series or different form-factor bays cannot use this specific tray and should verify their chassis requirements before ordering. It serves strictly as a physical mounting carrier.

Model-Specific Fit

The single specification that decides compatibility is the explicit model list: TS-473, TS-673, TS-873 and TS-1677X. Only those units accept the TRAY-35-NK-BLK06, so confirming the exact NAS model is the only check required before purchase.

Privalumai

  • Fits 3.5" drives in compatible QNAP NAS models
  • Tool-less drive mounting speeds up installation
  • Supports TS-473, TS-673, TS-873 and TS-1677X units
  • Durable construction protects drives during operation
  • Official QNAP accessory ensures exact fit

Specifikacijos

BrandQNAP
ModelTRAY-35-NK-BLK06
TypeAccessory
FeaturesHDD tray for TS-473, TS-673, TS-873, TS-1677X
Siuntos svoris1.36 kg
Pakuotės dydis254 × 127 × 76 mm

Klausimai apie šią prekę

How do I install the TRAY-35-NK-BLK06 into a TS-873 and which step is often missed?

Slide the 3.5 inch drive into the tray, secure it with the four side screws, then insert the tray into the bay until the latch clicks; the step most people miss is tightening those four screws before insertion.

What maintenance or replacement will this tray need over time?

The tray itself has no moving parts and requires no scheduled maintenance; only replace it if the plastic latch or metal rails become cracked or bent from repeated drive swaps.

What is the first limit I will hit when swapping drives continuously in a TS-1677X?

The plastic release latch is the first component to show wear under frequent drive changes, so inspect it regularly if you swap drives daily.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.