Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver anodised aluminium heatsink with mounted blower fan and spring pins for Raspberry Pi 5

Raspberry Pi

Raspberry Pi 5 Active Cooler SC1148

SKU CH-K4TB-9G16K

Official active cooler combining a large aluminium heatsink with a temperature-controlled blower fan for Raspberry Pi 5

  • Single-piece anodised aluminium heatsink draws heat from the processor
  • Temperature-controlled blower fan adjusts speed to workload demands
  • Spring-loaded push pins secure the cooler without tools
  • Pre-applied thermal pads ensure efficient heat transfer from day one
  • Designed for Raspberry Pi 5 to sustain higher performance under load

Official active cooler for Raspberry Pi 5

The SC1148 is an official Raspberry Pi accessory that combines a single-piece anodised aluminium heatsink with a temperature-controlled blower fan. It is designed for owners of the Raspberry Pi 5 who want to sustain higher clock speeds during demanding workloads. The cooler mounts directly to the board using spring-loaded push pins. It is compatible with the Raspberry Pi 5 and the official Raspberry Pi 5 Case.

Single-piece aluminium heatsink

The heatsink is machined from one piece of anodised aluminium and the blower fan is secured to it with three screws. Pre-applied thermal pads cover the contact surfaces so no separate paste or pads are required. Spring-loaded push pins press the assembly onto the Raspberry Pi 5 PCB, giving a secure fit that survives handling and vibration. The fan connects to the board's dedicated fan header for power and speed control.

Temperature-controlled blower for sustained loads

The variable-speed blower spins up only when the SoC temperature rises, keeping acoustic output low during light use. Under heavy compute tasks the airflow is directed across the full heatsink surface to move heat away from the processor. This active solution allows the Raspberry Pi 5 to maintain performance for longer periods than passive cooling alone. Power is drawn directly from the fan connector on the board.

Privalumai

  • Single-piece anodised aluminium heatsink draws heat from the processor
  • Temperature-controlled blower fan adjusts speed to workload demands
  • Spring-loaded push pins secure the cooler without tools
  • Pre-applied thermal pads ensure efficient heat transfer from day one
  • Designed for Raspberry Pi 5 to sustain higher performance under load

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How does the cooler connect to the Raspberry Pi 5 for temperature control?

It plugs into the fan connector on the Raspberry Pi 5, allowing the board to vary the blower speed based on CPU temperature.

What mounting hardware is used to attach the cooler to the board?

Spring-loaded push pins press through the Raspberry Pi 5 mounting holes and lock the heatsink in place without tools.

What must be done before pressing the push pins down?

Remove any protective film from the pre-applied thermal pads so they make direct contact with the SoC and other components.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.