Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver anodised aluminium heatsink with mounted blower fan and spring pins for Raspberry Pi 5

Raspberry Pi

Raspberry Pi 5 Active Cooler SC1148

SKU CH-K4TB-9G16K

Official active cooler combining a large aluminium heatsink with a temperature-controlled blower fan for Raspberry Pi 5

  • Single-piece anodised aluminium heatsink draws heat from the processor
  • Temperature-controlled blower fan adjusts speed to workload demands
  • Spring-loaded push pins secure the cooler without tools
  • Pre-applied thermal pads ensure efficient heat transfer from day one
  • Designed for Raspberry Pi 5 to sustain higher performance under load

Official active cooler for Raspberry Pi 5

The SC1148 is an official Raspberry Pi accessory that combines a single-piece anodised aluminium heatsink with a temperature-controlled blower fan. It is designed for owners of the Raspberry Pi 5 who want to sustain higher clock speeds during demanding workloads. The cooler mounts directly to the board using spring-loaded push pins. It is compatible with the Raspberry Pi 5 and the official Raspberry Pi 5 Case.

Single-piece aluminium heatsink

The heatsink is machined from one piece of anodised aluminium and the blower fan is secured to it with three screws. Pre-applied thermal pads cover the contact surfaces so no separate paste or pads are required. Spring-loaded push pins press the assembly onto the Raspberry Pi 5 PCB, giving a secure fit that survives handling and vibration. The fan connects to the board's dedicated fan header for power and speed control.

Temperature-controlled blower for sustained loads

The variable-speed blower spins up only when the SoC temperature rises, keeping acoustic output low during light use. Under heavy compute tasks the airflow is directed across the full heatsink surface to move heat away from the processor. This active solution allows the Raspberry Pi 5 to maintain performance for longer periods than passive cooling alone. Power is drawn directly from the fan connector on the board.

Priekšrocības

  • Single-piece anodised aluminium heatsink draws heat from the processor
  • Temperature-controlled blower fan adjusts speed to workload demands
  • Spring-loaded push pins secure the cooler without tools
  • Pre-applied thermal pads ensure efficient heat transfer from day one
  • Designed for Raspberry Pi 5 to sustain higher performance under load

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How does the cooler connect to the Raspberry Pi 5 for temperature control?

It plugs into the fan connector on the Raspberry Pi 5, allowing the board to vary the blower speed based on CPU temperature.

What mounting hardware is used to attach the cooler to the board?

Spring-loaded push pins press through the Raspberry Pi 5 mounting holes and lock the heatsink in place without tools.

What must be done before pressing the push pins down?

Remove any protective film from the pre-applied thermal pads so they make direct contact with the SoC and other components.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.