Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

Replace Power

Replace Power RPSU-C95-14 400W ATX power supply

SKU CH-W3M2-SZSDN MPN RPSU-C95-14

ATX power supply delivering 400 W with 20+4 pin, 4-pin 12 V, three SATA, PCI-E 6-pin, three Molex, floppy, auxiliary 6-pin and HP video connectors

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • 400W output powers compatible Antec and ATNG systems
  • 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
  • Three SATA connectors support multiple storage drives
  • Over-voltage protection safeguards connected components
  • Compact 5.85 x 3.314 x 3.98 inch form factor fits standard ATX cases

400W ATX Replacement Module

This Replace Power RPSU-C95-14 is a 400 watt ATX power supply designed as a direct replacement for specific Antec and ATNG units. It delivers the required connectors for older system builds and upgrades. A single fan cools the grey chassis.

Suits legacy Antec SP-350 SP-400 PP-412x ATNG

Builders restoring those exact models can use this unit without adapter cables. It fits the original mounting points and connector layout. Systems needing higher wattage or modern PCIe 8-pin power should look elsewhere.

24-pin ATX plus 4-pin CPU and SATA connectors

The harness includes one 20+4 pin motherboard connector, one 4-pin 12V CPU plug, three SATA 15-pin, three Molex 4-pin, one 6-pin PCIe, one floppy and one proprietary HP video plug. This exact connector mix decides compatibility.

Privalumai

  • 400W output powers compatible Antec and ATNG systems
  • 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
  • Three SATA connectors support multiple storage drives
  • Over-voltage protection safeguards connected components
  • Compact 5.85 x 3.314 x 3.98 inch form factor fits standard ATX cases

Specifikacijos

BrandReplace Power
ModelRPSU-C95-14
ColorGrey
TypeATX
Fans1
Weight0.1

Klausimai apie šią prekę

Does the 20+4 pin ATX connector fit both 20-pin and 24-pin motherboard sockets?

Yes, the single 20+4 pin ATX connector is designed to work with either 20-pin or 24-pin motherboard power sockets.

Will the 400 W output and single 4-pin 12 V connector support older Antec SP-350 or ATNG AT-250S systems?

The unit is rated at 400 W and includes one 4-pin 12 V connector, matching the power and connector requirements of those legacy Antec models.

How can I verify the PSU is delivering stable power after installation?

Check that the fan spins, the system boots without shutdowns, and the low-ripple, over-voltage protection features keep voltages steady under load.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.