Replace Power
Replace Power RPSU-C95-14 400W ATX power supply
ATX power supply delivering 400 W with 20+4 pin, 4-pin 12 V, three SATA, PCI-E 6-pin, three Molex, floppy, auxiliary 6-pin and HP video connectors
- ColorGrey
- TypeATX
- Fans1
- Weight0.1
- 400W output powers compatible Antec and ATNG systems
- 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
- Three SATA connectors support multiple storage drives
- Over-voltage protection safeguards connected components
- Compact 5.85 x 3.314 x 3.98 inch form factor fits standard ATX cases
400W ATX Replacement Module
This Replace Power RPSU-C95-14 is a 400 watt ATX power supply designed as a direct replacement for specific Antec and ATNG units. It delivers the required connectors for older system builds and upgrades. A single fan cools the grey chassis.
Suits legacy Antec SP-350 SP-400 PP-412x ATNG
Builders restoring those exact models can use this unit without adapter cables. It fits the original mounting points and connector layout. Systems needing higher wattage or modern PCIe 8-pin power should look elsewhere.
24-pin ATX plus 4-pin CPU and SATA connectors
The harness includes one 20+4 pin motherboard connector, one 4-pin 12V CPU plug, three SATA 15-pin, three Molex 4-pin, one 6-pin PCIe, one floppy and one proprietary HP video plug. This exact connector mix decides compatibility.
Points forts
- 400W output powers compatible Antec and ATNG systems
- 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
- Three SATA connectors support multiple storage drives
- Over-voltage protection safeguards connected components
- Compact 5.85 x 3.314 x 3.98 inch form factor fits standard ATX cases
Caractéristiques
| Brand | Replace Power |
|---|---|
| Model | RPSU-C95-14 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
Questions sur cet article
Does the 20+4 pin ATX connector fit both 20-pin and 24-pin motherboard sockets?
Yes, the single 20+4 pin ATX connector is designed to work with either 20-pin or 24-pin motherboard power sockets.
Will the 400 W output and single 4-pin 12 V connector support older Antec SP-350 or ATNG AT-250S systems?
The unit is rated at 400 W and includes one 4-pin 12 V connector, matching the power and connector requirements of those legacy Antec models.
How can I verify the PSU is delivering stable power after installation?
Check that the fan spins, the system boots without shutdowns, and the low-ripple, over-voltage protection features keep voltages steady under load.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



