NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Replace Power
ATX replacement power supply fits Compaq Presario SR1807CL, SR1810NX, SR1811NX and SR1815LA desktops with switchable 115/230 V input and reduced 5.9" depth
This ATX power supply replaces the original unit in Compaq Presario SR1807CL SR1810NX SR1811NX SR1815LA systems. It delivers the standard connectors those motherboards expect including one SATA connector one ATX power connector one 12V ATX power connector two large power connectors and one six inch small power connector. Builders restoring or upgrading these legacy PCs can install it without adapter cables.
The unit draws either 115 V or 230 V input selected by a manual switch on the rear. A single 80 mm fan provides cooling while the grey steel enclosure measures 5.9 inch height by 3.4 inch width giving reduced depth for tighter cases. Over current over power and over voltage protection circuits guard connected components during load changes.
The bundled cable set covers the motherboard power a single SATA drive and the legacy large and small peripheral plugs used by these Presario models. No modular cables or software utilities are included. Systems requiring additional SATA devices multiple 12V CPU connectors or PCIe graphics power will need a different supply.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-29 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 2.5 |
Mount the 5.9" x 3.4" unit with four screws, set the 115 / 230 V switch to match mains voltage, then connect the 20+4 pin ATX, 12V ATX, SATA and LP4 leads; the step often missed is flipping the voltage selector before first power-on.
Clean the 80mm fan intake every few months to prevent dust build-up; the unit has no user-serviceable parts, so replace the whole supply if voltages drift or the fan becomes noisy.
The 80mm fan and compact 5.9" depth restrict airflow, so thermal protection will trigger before the over-current or over-voltage circuits under continuous high draw.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?