NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Replace Power
ATX replacement power supply fits Compaq Presario SR1807CL, SR1810NX, SR1811NX and SR1815LA desktops with switchable 115/230 V input and reduced 5.9" depth
This ATX power supply replaces the original unit in Compaq Presario SR1807CL SR1810NX SR1811NX SR1815LA systems. It delivers the standard connectors those motherboards expect including one SATA connector one ATX power connector one 12V ATX power connector two large power connectors and one six inch small power connector. Builders restoring or upgrading these legacy PCs can install it without adapter cables.
The unit draws either 115 V or 230 V input selected by a manual switch on the rear. A single 80 mm fan provides cooling while the grey steel enclosure measures 5.9 inch height by 3.4 inch width giving reduced depth for tighter cases. Over current over power and over voltage protection circuits guard connected components during load changes.
The bundled cable set covers the motherboard power a single SATA drive and the legacy large and small peripheral plugs used by these Presario models. No modular cables or software utilities are included. Systems requiring additional SATA devices multiple 12V CPU connectors or PCIe graphics power will need a different supply.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-29 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 2.5 |
Mount the 5.9" x 3.4" unit with four screws, set the 115 / 230 V switch to match mains voltage, then connect the 20+4 pin ATX, 12V ATX, SATA and LP4 leads; the step often missed is flipping the voltage selector before first power-on.
Clean the 80mm fan intake every few months to prevent dust build-up; the unit has no user-serviceable parts, so replace the whole supply if voltages drift or the fan becomes noisy.
The 80mm fan and compact 5.9" depth restrict airflow, so thermal protection will trigger before the over-current or over-voltage circuits under continuous high draw.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?