NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Replace Power
A 420W ATX power supply with one SATA, one 20+4 pin ATX, one 12V ATX, four large and one small peripheral connectors, plus an 80mm fan and switchable 110/220V input
This 420W ATX unit is a direct replacement for Compaq Presario SR5035KR, SR5050NX, SR5102HM, SR5130NX and SR5152NX desktops. It fits the original mounting points and connector layout without modification. The grey enclosure uses a single 80mm fan for cooling. It suits owners restoring or upgrading these specific legacy systems.
The supply delivers 420W through a switchable 110V or 220V input. Connectors include one SATA lead, a 20+4 pin ATX lead, a dedicated 12V ATX lead, two large peripheral leads and one small peripheral lead. This complement covers the drives and motherboard in the target chassis. Builds needing multiple SATA devices or PCIe power will run out of native connectors.
The motherboard cable supports both 20-pin and 24-pin headers in a single 14-inch reach. The 12V ATX cable is also 14 inches. SATA and large peripheral cables are 15 inches; the shorter large and small peripheral cables are 6 inches. Verify these lengths suit your case routing before purchase.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-44 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
Yes, this 420W unit is listed as compatible with the SR5102HM and provides a 20+4 pin ATX connector, a 12V ATX connector, SATA power and multiple peripheral connectors for the original components.
Switch the input voltage selector to 110V or 220V as required, connect the 20+4 pin ATX and 12V ATX cables, power on the system and confirm the 80mm fan spins and the PC boots to the operating system.
The unit includes one 15-inch SATA connector, one 14-inch 20+4 pin ATX connector, one 14-inch 12V ATX connector, two 15-inch and two 6-inch large peripheral connectors, and one 6-inch small connector; no extra cables are required for the listed models.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?