NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Replace Power
A 420W ATX power supply with one SATA, one 20+4 pin ATX, one 12V ATX, four large and one small peripheral connectors, plus an 80mm fan and switchable 110/220V input
This 420W ATX unit is a direct replacement for Compaq Presario SR5035KR, SR5050NX, SR5102HM, SR5130NX and SR5152NX desktops. It fits the original mounting points and connector layout without modification. The grey enclosure uses a single 80mm fan for cooling. It suits owners restoring or upgrading these specific legacy systems.
The supply delivers 420W through a switchable 110V or 220V input. Connectors include one SATA lead, a 20+4 pin ATX lead, a dedicated 12V ATX lead, two large peripheral leads and one small peripheral lead. This complement covers the drives and motherboard in the target chassis. Builds needing multiple SATA devices or PCIe power will run out of native connectors.
The motherboard cable supports both 20-pin and 24-pin headers in a single 14-inch reach. The 12V ATX cable is also 14 inches. SATA and large peripheral cables are 15 inches; the shorter large and small peripheral cables are 6 inches. Verify these lengths suit your case routing before purchase.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-44 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
Yes, this 420W unit is listed as compatible with the SR5102HM and provides a 20+4 pin ATX connector, a 12V ATX connector, SATA power and multiple peripheral connectors for the original components.
Switch the input voltage selector to 110V or 220V as required, connect the 20+4 pin ATX and 12V ATX cables, power on the system and confirm the 80mm fan spins and the PC boots to the operating system.
The unit includes one 15-inch SATA connector, one 14-inch 20+4 pin ATX connector, one 14-inch 12V ATX connector, two 15-inch and two 6-inch large peripheral connectors, and one 6-inch small connector; no extra cables are required for the listed models.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?