Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver aluminium dual-bay M.2 NVMe dock with clone button and four progress LEDs

RIITOP

RIITOP Dual-Bay M.2 NVMe Duplicator Dock 10Gbps Offline Clone

SKU CH-QECA-VJCAW

Dual-bay M.2 NVMe duplicator dock clones drives offline at 10 Gbps and connects via USB 3.2 Type-C

  • TypeDock
  • Offline cloning without a computer by one-button press
  • 10 Gbps USB 3.2 Gen 2 read/write speeds for NVMe SSDs
  • Clones 256 GB to larger drives in about four minutes
  • Supports M.2 2230, 2242, 2260, 2280, 22110 NVMe form factors
  • Aluminium alloy body dissipates heat during intensive cloning

Dual-bay NVMe duplicator dock

The RIITOP dual-bay M.2 NVMe duplicator dock provides offline cloning and 10Gbps USB-C connectivity. It accepts two M-key NVMe SSDs in 2230, 2242, 2260, 2280 or 22110 form factors. A single button press starts a sector-by-sector copy from the source drive to a target drive of equal or larger capacity without a host computer. The aluminium enclosure also functions as a standard dual-drive reader when connected via USB 3.2 or 3.1.

Thermal behaviour and power

During operation the SSD temperature can exceed 60 °C, so direct contact should be avoided. The unit ships with a dedicated DC 5V power adapter and does not support hot-plugging; drives must only be swapped when the dock is powered off. Both bays share the single USB-C link, delivering up to 992MB/s sequential throughput for simultaneous read and write workloads.

Upgrade path and limitations

The dock replaces manual file transfers or software-based imaging tools when migrating an operating system or data set to a larger NVMe drive. It is not suited for SATA-based M.2 SSDs, B+M key modules, or any drive exceeding the listed M-key NVMe form factors. Buyers needing to clone between different interface types or requiring hot-swap capability should consider alternative solutions.

Privalumai

  • Offline cloning without a computer by one-button press
  • 10 Gbps USB 3.2 Gen 2 read/write speeds for NVMe SSDs
  • Clones 256 GB to larger drives in about four minutes
  • Supports M.2 2230, 2242, 2260, 2280, 22110 NVMe form factors
  • Aluminium alloy body dissipates heat during intensive cloning

Specifikacijos

TypeDock

Klausimai apie šią prekę

How do I set up offline cloning and which slot must hold the source drive?

Insert the source NVMe SSD into the right-hand slot and the target into the left, connect the 5 V DC adapter, then hold the clone button for three seconds; all four progress LEDs light when the copy finishes.

What ongoing care does the dock need during heavy cloning jobs?

The aluminium chassis acts as a heatsink, but SSDs can exceed 60 °C, so avoid touching them and ensure airflow around the unit; no fan or thermal-pad replacement is required.

What speed ceiling will I hit first when cloning large drives continuously?

The USB 3.2 Gen 2 Type-C link caps sustained throughput at 10 Gbps, and real-world NVMe read/write peaks near 992 MB/s, so the interface is the first bottleneck.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.