Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Silver aluminium dual-bay M.2 NVMe dock with clone button and four progress LEDs

RIITOP

RIITOP Dual-Bay M.2 NVMe Duplicator Dock 10Gbps Offline Clone

SKU CH-QECA-VJCAW

Dual-bay M.2 NVMe duplicator dock clones drives offline at 10 Gbps and connects via USB 3.2 Type-C

  • TypeDock
  • Offline cloning without a computer by one-button press
  • 10 Gbps USB 3.2 Gen 2 read/write speeds for NVMe SSDs
  • Clones 256 GB to larger drives in about four minutes
  • Supports M.2 2230, 2242, 2260, 2280, 22110 NVMe form factors
  • Aluminium alloy body dissipates heat during intensive cloning

Dual-bay NVMe duplicator dock

The RIITOP dual-bay M.2 NVMe duplicator dock provides offline cloning and 10Gbps USB-C connectivity. It accepts two M-key NVMe SSDs in 2230, 2242, 2260, 2280 or 22110 form factors. A single button press starts a sector-by-sector copy from the source drive to a target drive of equal or larger capacity without a host computer. The aluminium enclosure also functions as a standard dual-drive reader when connected via USB 3.2 or 3.1.

Thermal behaviour and power

During operation the SSD temperature can exceed 60 °C, so direct contact should be avoided. The unit ships with a dedicated DC 5V power adapter and does not support hot-plugging; drives must only be swapped when the dock is powered off. Both bays share the single USB-C link, delivering up to 992MB/s sequential throughput for simultaneous read and write workloads.

Upgrade path and limitations

The dock replaces manual file transfers or software-based imaging tools when migrating an operating system or data set to a larger NVMe drive. It is not suited for SATA-based M.2 SSDs, B+M key modules, or any drive exceeding the listed M-key NVMe form factors. Buyers needing to clone between different interface types or requiring hot-swap capability should consider alternative solutions.

Najważniejsze cechy

  • Offline cloning without a computer by one-button press
  • 10 Gbps USB 3.2 Gen 2 read/write speeds for NVMe SSDs
  • Clones 256 GB to larger drives in about four minutes
  • Supports M.2 2230, 2242, 2260, 2280, 22110 NVMe form factors
  • Aluminium alloy body dissipates heat during intensive cloning

Specyfikacja

TypeDock

Pytania dotyczące tego produktu

How do I set up offline cloning and which slot must hold the source drive?

Insert the source NVMe SSD into the right-hand slot and the target into the left, connect the 5 V DC adapter, then hold the clone button for three seconds; all four progress LEDs light when the copy finishes.

What ongoing care does the dock need during heavy cloning jobs?

The aluminium chassis acts as a heatsink, but SSDs can exceed 60 °C, so avoid touching them and ensure airflow around the unit; no fan or thermal-pad replacement is required.

What speed ceiling will I hit first when cloning large drives continuously?

The USB 3.2 Gen 2 Type-C link caps sustained throughput at 10 Gbps, and real-world NVMe read/write peaks near 992 MB/s, so the interface is the first bottleneck.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.