SAMSUNG
SAMSUNG MTFDDAV1T9TDS-1AW1ZABYYR 5300 Pro 1.92TB SATA 2.5" internal SSD
A 1.92 TB 2.5 inch SATA internal SSD delivering 540 MB/s read and 520 MB/s write speeds
- 92 TB capacity stores large datasets
- SATA 6.0 Gbps interface enables broad compatibility
- 540 MB/s maximum read speeds accelerate data access
- 520 MB/s maximum write speeds sustain heavy workloads
- 5 inch form factor fits standard drive bays
1.92 TB SATA 2.5" internal SSD
The Micron 5300 Pro is a 2.5 inch solid-state drive with a 1.92 TB capacity and a SATA 6.0 Gbps interface. It delivers sequential read speeds up to 540 MB/s and write speeds up to 520 MB/s. The drive targets enterprise and data-centre workloads that demand consistent performance and high endurance.
Suited for SATA bays and mixed workloads
This SSD fits servers and storage arrays that use 2.5 inch SATA drive bays and need a balance of read and write throughput. It is not suitable for systems that only accept M.2 modules or require a PCIe interface. Buyers who need higher throughput than the SATA link provides should consider a different interface.
SATA 6.0 Gbps interface decides compatibility
The single specification that determines fit is the SATA 6.0 Gbps interface, which limits maximum throughput to 540 MB/s read and 520 MB/s write. The host must provide a standard SATA data and power connection and a 2.5 inch drive bay. If the platform uses a different interface, this drive will not work.
Privalumai
- 92 TB capacity stores large datasets
- SATA 6.0 Gbps interface enables broad compatibility
- 540 MB/s maximum read speeds accelerate data access
- 520 MB/s maximum write speeds sustain heavy workloads
- 5 inch form factor fits standard drive bays
Specifikacijos
Šiai prekei specifikacijos dar nepaskelbtos.
Klausimai apie šią prekę
Will the 5300 Pro 1.92TB need a firmware update or controller swap down the line?
The 5300 Pro uses a SATA 6.0Gbps interface with no user-serviceable controller. Routine firmware checks via the vendor tool are the only maintenance step.
What limit appears first when the 540 MB/s read or 520 MB/s write runs continuously?
Sustained throughput is capped by the SATA 6.0Gbps link, so the 540 MB/s read and 520 MB/s write ceilings are reached before any thermal throttle.
How much heat or power does the 2.5" 5300 Pro add when it runs all day?
The 2.5" form factor draws standard SATA power and produces typical SSD heat; no active cooling is required for continuous operation.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
