저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Rectangular 2.5 inch SATA SSD with black metal casing and label showing 5300 Pro 1.92TB

SAMSUNG

SAMSUNG MTFDDAV1T9TDS-1AW1ZABYYR 5300 Pro 1.92TB SATA 2.5" internal SSD

SKU CH-00RK-ST8N1 MPN MTFDDAV1T9TDS-1AW1ZABYYR

A 1.92 TB 2.5 inch SATA internal SSD delivering 540 MB/s read and 520 MB/s write speeds

  • 92 TB capacity stores large datasets
  • SATA 6.0 Gbps interface enables broad compatibility
  • 540 MB/s maximum read speeds accelerate data access
  • 520 MB/s maximum write speeds sustain heavy workloads
  • 5 inch form factor fits standard drive bays

1.92 TB SATA 2.5" internal SSD

The Micron 5300 Pro is a 2.5 inch solid-state drive with a 1.92 TB capacity and a SATA 6.0 Gbps interface. It delivers sequential read speeds up to 540 MB/s and write speeds up to 520 MB/s. The drive targets enterprise and data-centre workloads that demand consistent performance and high endurance.

Suited for SATA bays and mixed workloads

This SSD fits servers and storage arrays that use 2.5 inch SATA drive bays and need a balance of read and write throughput. It is not suitable for systems that only accept M.2 modules or require a PCIe interface. Buyers who need higher throughput than the SATA link provides should consider a different interface.

SATA 6.0 Gbps interface decides compatibility

The single specification that determines fit is the SATA 6.0 Gbps interface, which limits maximum throughput to 540 MB/s read and 520 MB/s write. The host must provide a standard SATA data and power connection and a 2.5 inch drive bay. If the platform uses a different interface, this drive will not work.

주요 특징

  • 92 TB capacity stores large datasets
  • SATA 6.0 Gbps interface enables broad compatibility
  • 540 MB/s maximum read speeds accelerate data access
  • 520 MB/s maximum write speeds sustain heavy workloads
  • 5 inch form factor fits standard drive bays

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

Will the 5300 Pro 1.92TB need a firmware update or controller swap down the line?

The 5300 Pro uses a SATA 6.0Gbps interface with no user-serviceable controller. Routine firmware checks via the vendor tool are the only maintenance step.

What limit appears first when the 540 MB/s read or 520 MB/s write runs continuously?

Sustained throughput is capped by the SATA 6.0Gbps link, so the 540 MB/s read and 520 MB/s write ceilings are reached before any thermal throttle.

How much heat or power does the 2.5" 5300 Pro add when it runs all day?

The 2.5" form factor draws standard SATA power and produces typical SSD heat; no active cooling is required for continuous operation.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.