Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver 3.5 inch enterprise hard drive with aluminium top cover and label showing 10TB capacity

Seagate

Seagate ST10000NM0186 10TB 7200 RPM SATA 6.0Gb/s 256MB Cache 3.5" Internal Hard Drive

SKU CH-HF3P-E08EH

10 TB helium-sealed enterprise drive with 7200 RPM, 256 MB cache and SATA 6.0 Gb/s interface for high-capacity rack storage

  • InterfaceSATA 6.0Gb/s
  • Capacity10TB
  • RPM7200 RPM
  • Cache256MB
  • Average Latency4.16ms
  • FeaturesMaximum Storage Capacity for Highest Rack Space Efficiency -
  • 10TB capacity adds 25% more petabytes per rack
  • Helium-sealed aluminium enclosure prevents leaks for enterprise reliability
  • 5M-hour MTBF rating backs continuous data-centre workloads
  • PowerBalance technology optimises IOPS per watt for lower TCO
  • Advanced write caching delivers 20% random write performance boost

Enterprise 10TB helium drive

The Seagate ST10000NM0186 is a 3.5-inch internal hard drive built for enterprise storage arrays. It delivers 10TB capacity at 7200 RPM with a 256MB cache and a SATA 6.0Gb/s interface. The helium-sealed design reduces power draw and weight for dense rack deployments. It targets data centres needing maximum capacity per drive bay.

Standard SATA installation

Installation follows normal 3.5-inch SATA drive procedures using standard power and data cables. The forged aluminium base and hermetic helium seal require no special mounting hardware beyond typical drive trays. Issues arise when controllers or backplanes do not support 4Kn sector formatting or lack sufficient cooling for sustained enterprise workloads. Firmware mismatches on older RAID cards can also prevent the drive from being recognised.

Verify controller and airflow

Confirm the host controller or RAID card explicitly supports 4Kn sector drives and SATA 6.0Gb/s speeds. Check that the chassis provides adequate airflow for 7200 RPM helium drives in high-density configurations. Ensure the operating system and file system are compatible with 4Kn logical sectors. Validate power budget for multiple drives in the same enclosure.

Privalumai

  • 10TB capacity adds 25% more petabytes per rack
  • Helium-sealed aluminium enclosure prevents leaks for enterprise reliability
  • 5M-hour MTBF rating backs continuous data-centre workloads
  • PowerBalance technology optimises IOPS per watt for lower TCO
  • Advanced write caching delivers 20% random write performance boost

Specifikacijos

BrandSeagate
ModelST10000NM0186
InterfaceSATA 6.0Gb/s
Capacity10TB
RPM7200 RPM
Cache256MB
Average Latency4.16ms
FeaturesMaximum Storage Capacity for Highest Rack Space Efficiency
- 10TB per drive1 for 25% more petabytes per rack
- Industry's lowest power and weight for optimum data center TCO
- Forged, wrought-aluminum base and a helium sealed-drive design with uniform density and no porosity
- Superior material and weld-width design for a more robust, hermetically sealed-drive enclosure that protects from helium leaks
- Digital environmental sensors for measuring internal humidity, pressure and temperature, helping to ensure high reliability, performance and quality
- Latest hermetic interconnect tec
UsageFor Enterprise Storage
Form Factor3.5"
Height (maximum)26.11mm
Width (maximum)101.85mm
Length (maximum)147.00mm

Klausimai apie šią prekę

How do I verify the drive is operating correctly after installation?

Check that the BIOS or operating system detects the full 10TB capacity, the SATA 6.0Gb/s link speed, and the 7200 RPM spindle speed; run a SMART self-test and confirm the average latency reads near 4.16ms.

What is included in the box and what must I supply?

The box contains the 3.5-inch helium-sealed hard drive with forged aluminium base; you must provide a SATA data cable, a SATA power connector, and a 3.5-inch drive bay or mounting bracket.

Which capacity version should I choose for maximum rack density?

The 10TB model delivers 25% more petabytes per rack than the 8TB version, making it the highest-capacity choice for hyperscale and cloud data-centre deployments.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.