Seagate Cheetah NS ST3400755SSProduct 400 GB 3.5" SAS internal hard drive
- SLC
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Seagate
10 TB helium-sealed enterprise drive with 7200 RPM, 256 MB cache and SATA 6.0 Gb/s interface for high-capacity rack storage
The Seagate ST10000NM0186 is a 3.5-inch internal hard drive built for enterprise storage arrays. It delivers 10TB capacity at 7200 RPM with a 256MB cache and a SATA 6.0Gb/s interface. The helium-sealed design reduces power draw and weight for dense rack deployments. It targets data centres needing maximum capacity per drive bay.
Installation follows normal 3.5-inch SATA drive procedures using standard power and data cables. The forged aluminium base and hermetic helium seal require no special mounting hardware beyond typical drive trays. Issues arise when controllers or backplanes do not support 4Kn sector formatting or lack sufficient cooling for sustained enterprise workloads. Firmware mismatches on older RAID cards can also prevent the drive from being recognised.
Confirm the host controller or RAID card explicitly supports 4Kn sector drives and SATA 6.0Gb/s speeds. Check that the chassis provides adequate airflow for 7200 RPM helium drives in high-density configurations. Ensure the operating system and file system are compatible with 4Kn logical sectors. Validate power budget for multiple drives in the same enclosure.
| Brand | Seagate |
|---|---|
| Model | ST10000NM0186 |
| Interface | SATA 6.0Gb/s |
| Capacity | 10TB |
| RPM | 7200 RPM |
| Cache | 256MB |
| Average Latency | 4.16ms |
| Features | Maximum Storage Capacity for Highest Rack Space Efficiency - 10TB per drive1 for 25% more petabytes per rack - Industry's lowest power and weight for optimum data center TCO - Forged, wrought-aluminum base and a helium sealed-drive design with uniform density and no porosity - Superior material and weld-width design for a more robust, hermetically sealed-drive enclosure that protects from helium leaks - Digital environmental sensors for measuring internal humidity, pressure and temperature, helping to ensure high reliability, performance and quality - Latest hermetic interconnect tec |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
| Height (maximum) | 26.11mm |
| Width (maximum) | 101.85mm |
| Length (maximum) | 147.00mm |
Check that the BIOS or operating system detects the full 10TB capacity, the SATA 6.0Gb/s link speed, and the 7200 RPM spindle speed; run a SMART self-test and confirm the average latency reads near 4.16ms.
The box contains the 3.5-inch helium-sealed hard drive with forged aluminium base; you must provide a SATA data cable, a SATA power connector, and a 3.5-inch drive bay or mounting bracket.
The 10TB model delivers 25% more petabytes per rack than the 8TB version, making it the highest-capacity choice for hyperscale and cloud data-centre deployments.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?