Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Low-profile bracket with DB9 male and IDC10 connectors on a 229mm cable

STARTECH

STARTECH PLATE9MLP 9-pin Serial to 10-pin Header Slot Plate expansion card

SKU CH-YDRS-DE03H MPN PLATE9MLP

Adds a DB9 serial port to low-profile systems via a 10-pin motherboard header and 229 mm cable

  • TypeSerial Header Adapter
  • SpecificationsConnectors DB9 Male, IDC 10 Cable Length 9" (229mm)
  • FeaturesThis 9-pin Serial to 10-pin Header Slot Plate features DB9,
  • Weight0.05
  • Adds a DB9 serial port to low-profile PCs
  • Connects to motherboard via 10-pin IDC header
  • 229 mm cable reaches rear panel easily
  • Low-profile bracket fits small form-factor cases
  • Weighs only .05 kg for minimal load

9-pin Serial Header Adapter for Low Profile PCs

This slot plate adds a DB9 serial port to the rear panel of a small form factor or low profile computer. It connects to the motherboard using an IDC10 header. The adapter is designed for systems that require a legacy serial connection but lack an integrated port. Builders needing USB or other modern interfaces will not find them here.

IDC10 Header Limits Cable Reach

The included cable measures 9 inches (229mm), which restricts placement to headers near the rear expansion slot. Motherboards without a matching 10-pin IDC serial header cannot use this adapter. The low profile bracket fits only compatible low profile chassis slots. Systems requiring internal device connections instead of a rear port are not supported.

DB9 Male and IDC10 Female Connector Pair Defines Fit

The product provides a 9-pin DB9 male connector on the bracket and a 10-pin IDC female connector for the motherboard header. This specific connector pairing determines whether the adapter matches the target system. Verifying the motherboard header pinout against this pair is the single step that confirms compatibility.

Privalumai

  • Adds a DB9 serial port to low-profile PCs
  • Connects to motherboard via 10-pin IDC header
  • 229 mm cable reaches rear panel easily
  • Low-profile bracket fits small form-factor cases
  • Weighs only .05 kg for minimal load

Specifikacijos

BrandStarTech.com
ModelPLATE9MLP
TypeSerial Header Adapter
SpecificationsConnectors DB9 Male, IDC 10
Cable Length 9" (229mm)
FeaturesThis 9-pin Serial to 10-pin Header Slot Plate features DB9, IDC10 connectors and a low profile bracket.
Weight0.05
Siuntos svoris0.02 kg
Pakuotės dydis124 × 84 × 33 mm

Klausimai apie šią prekę

Should I pick the low-profile bracket version or a full-height bracket for my case?

This model ships with a low-profile bracket designed for small-form-factor chassis; no full-height bracket is included.

What does the 9-inch cable length mean when the plate is installed?

The 229 mm ribbon gives enough slack to route from a motherboard IDC10 header to the rear expansion slot without tension.

Which motherboard header does the IDC10 connector plug into?

It connects to a standard 10-pin serial header on the motherboard, adding a DB9 male port to the back panel.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.