我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Low-profile bracket with DB9 male and IDC10 connectors on a 229mm cable

STARTECH

STARTECH PLATE9MLP 9-pin Serial to 10-pin Header Slot Plate expansion card

SKU CH-YDRS-DE03H MPN PLATE9MLP

Adds a DB9 serial port to low-profile systems via a 10-pin motherboard header and 229 mm cable

  • TypeSerial Header Adapter
  • SpecificationsConnectors DB9 Male, IDC 10 Cable Length 9" (229mm)
  • FeaturesThis 9-pin Serial to 10-pin Header Slot Plate features DB9,
  • Weight0.05
  • Adds a DB9 serial port to low-profile PCs
  • Connects to motherboard via 10-pin IDC header
  • 229 mm cable reaches rear panel easily
  • Low-profile bracket fits small form-factor cases
  • Weighs only .05 kg for minimal load

9-pin Serial Header Adapter for Low Profile PCs

This slot plate adds a DB9 serial port to the rear panel of a small form factor or low profile computer. It connects to the motherboard using an IDC10 header. The adapter is designed for systems that require a legacy serial connection but lack an integrated port. Builders needing USB or other modern interfaces will not find them here.

IDC10 Header Limits Cable Reach

The included cable measures 9 inches (229mm), which restricts placement to headers near the rear expansion slot. Motherboards without a matching 10-pin IDC serial header cannot use this adapter. The low profile bracket fits only compatible low profile chassis slots. Systems requiring internal device connections instead of a rear port are not supported.

DB9 Male and IDC10 Female Connector Pair Defines Fit

The product provides a 9-pin DB9 male connector on the bracket and a 10-pin IDC female connector for the motherboard header. This specific connector pairing determines whether the adapter matches the target system. Verifying the motherboard header pinout against this pair is the single step that confirms compatibility.

商品特色

  • Adds a DB9 serial port to low-profile PCs
  • Connects to motherboard via 10-pin IDC header
  • 229 mm cable reaches rear panel easily
  • Low-profile bracket fits small form-factor cases
  • Weighs only .05 kg for minimal load

商品規格

BrandStarTech.com
ModelPLATE9MLP
TypeSerial Header Adapter
SpecificationsConnectors DB9 Male, IDC 10
Cable Length 9" (229mm)
FeaturesThis 9-pin Serial to 10-pin Header Slot Plate features DB9, IDC10 connectors and a low profile bracket.
Weight0.05
出貨重量0.02 kg
包裝尺寸124 × 84 × 33 mm

商品問答

Should I pick the low-profile bracket version or a full-height bracket for my case?

This model ships with a low-profile bracket designed for small-form-factor chassis; no full-height bracket is included.

What does the 9-inch cable length mean when the plate is installed?

The 229 mm ribbon gives enough slack to route from a motherboard IDC10 header to the rear expansion slot without tension.

Which motherboard header does the IDC10 connector plug into?

It connects to a standard 10-pin serial header on the motherboard, adding a DB9 male port to the back panel.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。