Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black frameless fan, 45 mm diameter, two-wire connector

SunnyStar Co., Ltd

SunnyStar Co., Ltd A5010L12S 12V 0.08A 45mm frameless black VGA fan for HD4350 4550

SKU CH-8K2P-YSZ1R

45 mm frameless 12 V 0.08 A sleeve-bearing fan with 2-pin connector for HD4350 and HD4550 graphics cards

  • ColorBlack
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • 12 V 0.08 A low power draw keeps energy use minimal
  • 45 mm frameless design fits tight graphics-card spaces
  • 26 mm mounting-hole spacing matches HD 4350 and HD 4550 coolers
  • Sleeve bearing runs quietly at low RPM
  • Two-pin connector plugs straight onto legacy VGA headers

Replacement Fan for HD4350 and HD4550

This frameless black VGA fan operates at 12V and draws 0.08A. It uses a sleeve bearing and connects via a 2-pin power connector with two wires. The unit is sold new as a fan-only component without LED lighting.

Suits Direct Swaps on Listed Models

The cooler fits HD4350 and HD4550 graphics cards that originally used this specific frameless design. Builders repairing different card models or those needing PWM speed control should look at other options because this fan provides only a basic 2-pin connection.

Mounting Hole Spacing Decides Fit

The mounting holes are spaced 26mm by 26mm with a 20mm depth, while the fan diameter measures 45mm. If the original cooler on the card does not match these exact dimensions the fan will not install correctly.

Privalumai

  • 12 V 0.08 A low power draw keeps energy use minimal
  • 45 mm frameless design fits tight graphics-card spaces
  • 26 mm mounting-hole spacing matches HD 4350 and HD 4550 coolers
  • Sleeve bearing runs quietly at low RPM
  • Two-pin connector plugs straight onto legacy VGA headers

Specifikacijos

ModelA5010L12S
ColorBlack
TypeFan only
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Klausimai apie šią prekę

What current does the 12 V 2-pin connector draw on this A5010L12S fan?

The fan is rated at 12 V and 0.08 A, so the 2-pin connector draws 0.08 A in operation.

What are the mounting-hole dimensions for the frameless 45 mm black fan?

The mounting holes are spaced 26 mm by 26 mm with a 20 mm depth, matching the HD4350 and HD4550 graphics card coolers.

How do you connect the two-wire sleeve-bearing fan to the graphics card header?

Align the 2-pin plug with the card's fan header, press straight in until seated, and verify the black wire matches the ground pin — reversing the plug will prevent the fan from spinning.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.