Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small black frameless fan, 45 mm diameter, two-wire connector

SunnyStar Co., Ltd

SunnyStar Co., Ltd A5010L12S 12V 0.08A 45mm frameless black VGA fan for HD4350 4550

SKU CH-8K2P-YSZ1R

45 mm frameless 12 V 0.08 A sleeve-bearing fan with 2-pin connector for HD4350 and HD4550 graphics cards

  • ColorBlack
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • 12 V 0.08 A low power draw keeps energy use minimal
  • 45 mm frameless design fits tight graphics-card spaces
  • 26 mm mounting-hole spacing matches HD 4350 and HD 4550 coolers
  • Sleeve bearing runs quietly at low RPM
  • Two-pin connector plugs straight onto legacy VGA headers

Replacement Fan for HD4350 and HD4550

This frameless black VGA fan operates at 12V and draws 0.08A. It uses a sleeve bearing and connects via a 2-pin power connector with two wires. The unit is sold new as a fan-only component without LED lighting.

Suits Direct Swaps on Listed Models

The cooler fits HD4350 and HD4550 graphics cards that originally used this specific frameless design. Builders repairing different card models or those needing PWM speed control should look at other options because this fan provides only a basic 2-pin connection.

Mounting Hole Spacing Decides Fit

The mounting holes are spaced 26mm by 26mm with a 20mm depth, while the fan diameter measures 45mm. If the original cooler on the card does not match these exact dimensions the fan will not install correctly.

Pluspunten

  • 12 V 0.08 A low power draw keeps energy use minimal
  • 45 mm frameless design fits tight graphics-card spaces
  • 26 mm mounting-hole spacing matches HD 4350 and HD 4550 coolers
  • Sleeve bearing runs quietly at low RPM
  • Two-pin connector plugs straight onto legacy VGA headers

Specificaties

ModelA5010L12S
ColorBlack
TypeFan only
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Vragen over dit artikel

What current does the 12 V 2-pin connector draw on this A5010L12S fan?

The fan is rated at 12 V and 0.08 A, so the 2-pin connector draws 0.08 A in operation.

What are the mounting-hole dimensions for the frameless 45 mm black fan?

The mounting holes are spaced 26 mm by 26 mm with a 20 mm depth, matching the HD4350 and HD4550 graphics card coolers.

How do you connect the two-wire sleeve-bearing fan to the graphics card header?

Align the 2-pin plug with the card's fan header, press straight in until seated, and verify the black wire matches the ground pin — reversing the plug will prevent the fan from spinning.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.