Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Square 60mm server fan with blue mounting bracket and four-wire connector

SXDOOL

SXDOOL 2B06038B12G 60mm 12V 2.20A 4-wire ball bearing 14500 RPM case fan

SKU CH-JEBV-FST67 MPN 2B06038B12G

60 mm 12 V ball-bearing fan with 4-wire PWM control spins at 14500 RPM and includes a blue mounting bracket

  • High-speed cooling at 14500 RPM for dense server chassis
  • Four-wire PWM control enables precise automatic speed regulation
  • Ball-bearing design extends operational lifespan under continuous load
  • Direct replacement for HP DL180 G6 G7 part numbers 519199-001 and 530748-001
  • Compact 60 x 60 x 38 mm frame fits restricted 1U bays

Server-grade 60mm replacement fan

This 60mm case fan is built as a direct replacement for HP DL180 G6 and G7 servers as well as the P4300 G2 storage array. It matches the original AVC 2B06038B12G specification and ships with the blue mounting bracket attached. The four-wire connector provides PWM control and tachometer feedback to the server management subsystem. System administrators maintaining these platforms can install it without adapter cables or bracket modifications.

14500 RPM airflow at 12V 2.20A

The fan draws 2.20A at 12V to spin its ball-bearing rotor at 14500 RPM, delivering the high static pressure required by dense 1U and 2U chassis. That speed satisfies the cooling curve of the DL180 G6 and G7 under full CPU and memory load. Headroom diminishes if the chassis air path is obstructed by missing baffles or clogged filters, so the fan cannot compensate for poor rack hygiene or removed airflow guides.

Ball bearing durability and keyed four-wire plug

The ball bearing is rated for continuous operation in server environments where sleeve bearings would wear prematurely. The moulded blue bracket aligns with the original screw holes in the DL180 and P4300 G2 fan trays, preventing vibration-induced noise. The keyed four-wire plug ensures correct polarity and PWM signalling; forcing a three-wire header would disable speed reporting and fan-fault alerts.

Privalumai

  • High-speed cooling at 14500 RPM for dense server chassis
  • Four-wire PWM control enables precise automatic speed regulation
  • Ball-bearing design extends operational lifespan under continuous load
  • Direct replacement for HP DL180 G6 G7 part numbers 519199-001 and 530748-001
  • Compact 60 x 60 x 38 mm frame fits restricted 1U bays

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

Will the 4-wire plug and 60mm frame fit the existing fan header and mounting holes on my HP DL180 G6?

The fan uses the original 4-wire plug and 60mm x 60mm frame specified for the HP DL180 G6 and G7, so it connects directly to the server's fan header and aligns with the standard mounting points.

How can I verify the 14500 RPM ball-bearing fan is spinning correctly after installation?

The 4-wire connector provides a tachometer signal; monitor the reported speed in the server's BIOS, iLO interface or operating-system hardware monitor and confirm it reads near 14500 RPM under load.

Does the package include the blue mounting bracket shown for the HP DL180 G6, or must I source it separately?

The supplied unit comes with the blue bracket attached, matching the HP 519199-001 and 530748-001 assembly, so no separate bracket purchase is required.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.