Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black 30mm square frame fan with magnetic levitation bearing

SXDOOL

SXDOOL HA30101V3-0000-A99 30mm 12V 0.44W magnetic levitation case fan

SKU CH-S2MD-7GN21

A 30 mm magnetic levitation case fan spinning above 7000 RPM with 15 to 20 dBA noise and 12 V 0.44 W power draw

  • Fan Size30mm
  • RPM>7000 RPM
  • Air Flow1-5 CFM
  • Noise Level15 - 20 dBA
  • Power Connector2 Pin
  • ColorBlack
  • Magnetic levitation reduces friction for longer life
  • 12 V 0.44 W draws minimal power from the supply
  • 30 mm frame fits ultra-compact chassis slots
  • >7 000 RPM delivers focused airflow where space is tight
  • 15–20 dBA keeps system noise near-silent

30 mm 12 V magnetic levitation case fan

The SXDOOL HA30101V3-0000-A99 is a 30 mm square case fan that runs on 12 V and draws 0.44 W. Magnetic levitation bearings keep friction low and allow speeds above 7000 RPM while the motor stays quiet at 15 to 20 dBA. A simple two-pin connector supplies power without any lighting or speed-signal wires. Its 3010 form factor fits tight spots where larger fans cannot be mounted.

Who this suits and who should look elsewhere

Builders cooling small-form-factor cases, rack appliances or GPU backplates will appreciate the slim 30 mm profile and the 1 to 5 CFM airflow range. The low noise floor helps in noise-sensitive workstations or home-theatre PCs. Buyers who need higher static pressure for dense radiators, or who want PWM control and addressable lighting, should look at larger or four-pin models instead.

Deciding specification: 30 mm frame

The 30 mm frame size and two-pin 12 V connection are the critical fitment details. Verify that your chassis or device has a 3010 mounting pattern and a matching two-pin header before ordering. The 0.44 W draw is modest, but the connector type cannot be adapted without a separate cable. If the mounting holes or power header differ, this fan will not install correctly.

Privalumai

  • Magnetic levitation reduces friction for longer life
  • 12 V 0.44 W draws minimal power from the supply
  • 30 mm frame fits ultra-compact chassis slots
  • >7 000 RPM delivers focused airflow where space is tight
  • 15–20 dBA keeps system noise near-silent

Specifikacijos

Fan Size30mm
RPM>7000 RPM
Air Flow1-5 CFM
Noise Level15 - 20 dBA
Power Connector2 Pin
ColorBlack
LEDNon-LED

Klausimai apie šią prekę

Which SXDOOL 30mm 12V fan should I choose for a tight 3010 mounting space?

The HA30101V3-0000-A99 fits the 30x30x10mm footprint and uses a 2-pin connector, making it the direct match for that slot.

What does the >7000 RPM rating deliver inside a live chassis?

It produces 1-5 CFM of airflow at 15-20 dBA, so it moves a modest air volume quietly in confined areas.

How does the 2-pin 12V interface limit speed control?

The two-wire design supplies fixed 12V power with no PWM or voltage-regulation line, so the fan runs at full >7000 RPM whenever powered.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.