Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small black 30mm square frame fan with magnetic levitation bearing

SXDOOL

SXDOOL HA30101V3-0000-A99 30mm 12V 0.44W magnetic levitation case fan

SKU CH-S2MD-7GN21

A 30 mm magnetic levitation case fan spinning above 7000 RPM with 15 to 20 dBA noise and 12 V 0.44 W power draw

  • Fan Size30mm
  • RPM>7000 RPM
  • Air Flow1-5 CFM
  • Noise Level15 - 20 dBA
  • Power Connector2 Pin
  • ColorBlack
  • Magnetic levitation reduces friction for longer life
  • 12 V 0.44 W draws minimal power from the supply
  • 30 mm frame fits ultra-compact chassis slots
  • >7 000 RPM delivers focused airflow where space is tight
  • 15–20 dBA keeps system noise near-silent

30 mm 12 V magnetic levitation case fan

The SXDOOL HA30101V3-0000-A99 is a 30 mm square case fan that runs on 12 V and draws 0.44 W. Magnetic levitation bearings keep friction low and allow speeds above 7000 RPM while the motor stays quiet at 15 to 20 dBA. A simple two-pin connector supplies power without any lighting or speed-signal wires. Its 3010 form factor fits tight spots where larger fans cannot be mounted.

Who this suits and who should look elsewhere

Builders cooling small-form-factor cases, rack appliances or GPU backplates will appreciate the slim 30 mm profile and the 1 to 5 CFM airflow range. The low noise floor helps in noise-sensitive workstations or home-theatre PCs. Buyers who need higher static pressure for dense radiators, or who want PWM control and addressable lighting, should look at larger or four-pin models instead.

Deciding specification: 30 mm frame

The 30 mm frame size and two-pin 12 V connection are the critical fitment details. Verify that your chassis or device has a 3010 mounting pattern and a matching two-pin header before ordering. The 0.44 W draw is modest, but the connector type cannot be adapted without a separate cable. If the mounting holes or power header differ, this fan will not install correctly.

Helstu kostir

  • Magnetic levitation reduces friction for longer life
  • 12 V 0.44 W draws minimal power from the supply
  • 30 mm frame fits ultra-compact chassis slots
  • >7 000 RPM delivers focused airflow where space is tight
  • 15–20 dBA keeps system noise near-silent

Tæknilýsing

Fan Size30mm
RPM>7000 RPM
Air Flow1-5 CFM
Noise Level15 - 20 dBA
Power Connector2 Pin
ColorBlack
LEDNon-LED

Spurningar um þessa vöru

Which SXDOOL 30mm 12V fan should I choose for a tight 3010 mounting space?

The HA30101V3-0000-A99 fits the 30x30x10mm footprint and uses a 2-pin connector, making it the direct match for that slot.

What does the >7000 RPM rating deliver inside a live chassis?

It produces 1-5 CFM of airflow at 15-20 dBA, so it moves a modest air volume quietly in confined areas.

How does the 2-pin 12V interface limit speed control?

The two-wire design supplies fixed 12V power with no PWM or voltage-regulation line, so the fan runs at full >7000 RPM whenever powered.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.