Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Square black 140 mm case fan with golf-groove blades and 3-pin connector

SXDOOL

SXDOOL ZG3-140C 140 mm case fan 12V 0.1A 1.2W 800 RPM 11.0 dBA

SKU CH-GMV2-ZM99A MPN ZG3-140C

A 140 mm case fan running at 800 RPM with 11.0 dBA noise and a Duro bearing rated for 60000 hours

  • Quiet operation at 11.0 dBA for low-noise builds
  • Golf-groove blades cut noise by 15 % at equal airflow
  • Duro bearing rated for 60000 hours of continuous use
  • Low 1.2 W draw from a 12 V 0.1 A supply
  • 140 mm frame with 3-pin connector and bundled mounting kit

140 mm low-noise cooling fan

The SXDOOL ZG3-140C is a 140 mm case fan built for quiet system airflow. It runs at 800 RPM with a rated noise level of 11.0 dBA. The unit uses a Duro bearing rated for 60000 hours of operation. A golf-groove blade design reduces turbulence at equivalent speed and air volume.

Builders who need silent operation

This fan suits builders who prioritise low acoustic output over maximum airflow. The 64.37 CFM rating at 800 RPM is modest, so it is not for users who need high static pressure for dense radiators. It also lacks a fourth PWM wire, so it is not for systems that require motherboard speed control.

Three-pin 12 V power interface

The fan connects via a standard three-pin 12 V header drawing 0.1 A and 1.2 W. An adapter cable is included for alternative power connections. Speed runs at 800 RPM with a tolerance of ±250 RPM. Mounting hardware includes rubber nails, washers and short screws.

Privalumai

  • Quiet operation at 11.0 dBA for low-noise builds
  • Golf-groove blades cut noise by 15 % at equal airflow
  • Duro bearing rated for 60000 hours of continuous use
  • Low 1.2 W draw from a 12 V 0.1 A supply
  • 140 mm frame with 3-pin connector and bundled mounting kit

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

What comes in the box and what must I buy separately?

The package includes the 140 mm fan, a 3-pin adapter cable, four rubber mounting nails, four rubber washers and four short screws. No extra parts are required for a standard motherboard header.

Which version should I choose for a 12 V 3-pin header?

The ZG3-140C is the single 12 V, 0.1 A, 3-pin model rated at 800 RPM and 64.37 CFM.

What does the 11.0 dBA figure mean once the fan is installed?

At 800 RPM the fan produces 11.0 dBA; the golf-groove blades cut noise by about 15 % compared with a plain blade at the same speed and airflow.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.