Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Square black 140 mm case fan with golf-groove blades and 3-pin connector

SXDOOL

SXDOOL ZG3-140C 140 mm case fan 12V 0.1A 1.2W 800 RPM 11.0 dBA

SKU CH-GMV2-ZM99A MPN ZG3-140C

A 140 mm case fan running at 800 RPM with 11.0 dBA noise and a Duro bearing rated for 60000 hours

  • Quiet operation at 11.0 dBA for low-noise builds
  • Golf-groove blades cut noise by 15 % at equal airflow
  • Duro bearing rated for 60000 hours of continuous use
  • Low 1.2 W draw from a 12 V 0.1 A supply
  • 140 mm frame with 3-pin connector and bundled mounting kit

140 mm low-noise cooling fan

The SXDOOL ZG3-140C is a 140 mm case fan built for quiet system airflow. It runs at 800 RPM with a rated noise level of 11.0 dBA. The unit uses a Duro bearing rated for 60000 hours of operation. A golf-groove blade design reduces turbulence at equivalent speed and air volume.

Builders who need silent operation

This fan suits builders who prioritise low acoustic output over maximum airflow. The 64.37 CFM rating at 800 RPM is modest, so it is not for users who need high static pressure for dense radiators. It also lacks a fourth PWM wire, so it is not for systems that require motherboard speed control.

Three-pin 12 V power interface

The fan connects via a standard three-pin 12 V header drawing 0.1 A and 1.2 W. An adapter cable is included for alternative power connections. Speed runs at 800 RPM with a tolerance of ±250 RPM. Mounting hardware includes rubber nails, washers and short screws.

Pluspunten

  • Quiet operation at 11.0 dBA for low-noise builds
  • Golf-groove blades cut noise by 15 % at equal airflow
  • Duro bearing rated for 60000 hours of continuous use
  • Low 1.2 W draw from a 12 V 0.1 A supply
  • 140 mm frame with 3-pin connector and bundled mounting kit

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

What comes in the box and what must I buy separately?

The package includes the 140 mm fan, a 3-pin adapter cable, four rubber mounting nails, four rubber washers and four short screws. No extra parts are required for a standard motherboard header.

Which version should I choose for a 12 V 3-pin header?

The ZG3-140C is the single 12 V, 0.1 A, 3-pin model rated at 800 RPM and 64.37 CFM.

What does the 11.0 dBA figure mean once the fan is installed?

At 800 RPM the fan produces 11.0 dBA; the golf-groove blades cut noise by about 15 % compared with a plain blade at the same speed and airflow.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.