Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black metal cable management arm with sliding rails and cable clips, mounted on a rack rail kit

Synology Inc.

Synology Inc. CMA-01 Cable Management Arm for Rackmount NAS

SKU CH-R9AZ-G631W MPN CMA-01

Organises data and power cables, optimises rack space and allows rear access when mounted on compatible Synology rail kits

  • FeaturesSynology Cable Management Arm CMA-01 allows you to organize
  • Organises data and power cables for a tidy rack
  • Optimises rack cabinet space with compact arm design
  • Enables proper rear access for easier maintenance
  • Attaches easily to compatible Synology RKS-02 rail kits
  • Requires mount posts at least 450 mm wide, 125 mm deep, 41 mm high

Cable organisation for rack cabinets

The Synology CMA-01 cable management arm organises data and power cables inside a rack cabinet. It attaches to compatible Synology rail kits to keep wiring tidy and preserve access to the rear of the system. The arm helps optimise cabinet space by routing cables away from airflow paths.

Installers with compatible rails and sufficient

This arm suits administrators deploying Synology RKS-02 rail kits who need structured cable routing. It is not for cabinets where mount posts are narrower than 450 mm, shallower than 125 mm, or lower than 41 mm. Buyers using other rail systems or open-frame racks without posts should look elsewhere.

RKS-02 rail kit compatibility

The CMA-01 is designed exclusively for the Synology RKS-02 rail kit. No other rail kit is supported, so the arm will not mount without it. Verify the rail kit model before purchase.

Privalumai

  • Organises data and power cables for a tidy rack
  • Optimises rack cabinet space with compact arm design
  • Enables proper rear access for easier maintenance
  • Attaches easily to compatible Synology RKS-02 rail kits
  • Requires mount posts at least 450 mm wide, 125 mm deep, 41 mm high

Specifikacijos

BrandSynology
ModelCMA-01
FeaturesSynology Cable Management Arm CMA-01 allows you to organize data and power cables, optimize rack cabinet space, and enable proper access to the rear of the system. It can be easily attached to compatible Synology rail kits.
Installation requirements:
Mount post width must be equal to or greater than 450 mm
Mount post depth must be equal to or greater than 125 mm
Mount post height must be equal to or greater than 41 mm
Compatibility:
Synology Rail Kit: RKS-02
Siuntos svoris0.77 kg
Pakuotės dydis511 × 180 × 69 mm

Klausimai apie šią prekę

Do I need a specific Synology rail kit to install this cable management arm?

Yes, the CMA-01 is designed to attach to the Synology RKS-02 rail kit for supported rackmount NAS units.

Will this arm work if my rack posts are spaced closer than 450 mm in width?

The mount posts must be at least 450 mm wide, so narrower post spacing will prevent installation.

How can I verify the arm is correctly fitted after installation?

Cables should route cleanly through the arm, the NAS must slide fully into the rack without binding, and rear access should remain clear for maintenance.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.