Synology Inc.
Synology Inc. CMA-01 Cable Management Arm for Rackmount NAS
Organises data and power cables, optimises rack space and allows rear access when mounted on compatible Synology rail kits
- FeaturesSynology Cable Management Arm CMA-01 allows you to organize
- Organises data and power cables for a tidy rack
- Optimises rack cabinet space with compact arm design
- Enables proper rear access for easier maintenance
- Attaches easily to compatible Synology RKS-02 rail kits
- Requires mount posts at least 450 mm wide, 125 mm deep, 41 mm high
Cable organisation for rack cabinets
The Synology CMA-01 cable management arm organises data and power cables inside a rack cabinet. It attaches to compatible Synology rail kits to keep wiring tidy and preserve access to the rear of the system. The arm helps optimise cabinet space by routing cables away from airflow paths.
Installers with compatible rails and sufficient
This arm suits administrators deploying Synology RKS-02 rail kits who need structured cable routing. It is not for cabinets where mount posts are narrower than 450 mm, shallower than 125 mm, or lower than 41 mm. Buyers using other rail systems or open-frame racks without posts should look elsewhere.
RKS-02 rail kit compatibility
The CMA-01 is designed exclusively for the Synology RKS-02 rail kit. No other rail kit is supported, so the arm will not mount without it. Verify the rail kit model before purchase.
Puntos fuertes
- Organises data and power cables for a tidy rack
- Optimises rack cabinet space with compact arm design
- Enables proper rear access for easier maintenance
- Attaches easily to compatible Synology RKS-02 rail kits
- Requires mount posts at least 450 mm wide, 125 mm deep, 41 mm high
Especificaciones
| Brand | Synology |
|---|---|
| Model | CMA-01 |
| Features | Synology Cable Management Arm CMA-01 allows you to organize data and power cables, optimize rack cabinet space, and enable proper access to the rear of the system. It can be easily attached to compatible Synology rail kits. Installation requirements: Mount post width must be equal to or greater than 450 mm Mount post depth must be equal to or greater than 125 mm Mount post height must be equal to or greater than 41 mm Compatibility: Synology Rail Kit: RKS-02 |
| Peso de envío | 0.77 kg |
| Dimensiones del paquete | 511 × 180 × 69 mm |
Preguntas sobre este artículo
Do I need a specific Synology rail kit to install this cable management arm?
Yes, the CMA-01 is designed to attach to the Synology RKS-02 rail kit for supported rackmount NAS units.
Will this arm work if my rack posts are spaced closer than 450 mm in width?
The mount posts must be at least 450 mm wide, so narrower post spacing will prevent installation.
How can I verify the arm is correctly fitted after installation?
Cables should route cleanly through the arm, the NAS must slide fully into the rack without binding, and rear access should remain clear for maintenance.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.
